Troika ice40

aliakseimakarau·troika_ice40·kicad/ice40troika.kicad_pcb

Troika ice40 PCB layout, top view — open source FPGA board by aliakseimakarau

About the Troika ice40 PCB

Troika ice40 is an open source FPGA PCB design by aliakseimakarau, published on GitHub. It is a 2-layer board measuring 68 × 38 mm, with 73 components from 27 distinct parts.

Its main chip is the ice40up5k, from the FPGA family. Other key parts include the USBLC6-2SC6, STM32F302CCT6, SIM808, LP2985-3.3 and MIC5504-1.2YM5. By type, the board carries 36 capacitors, 22 resistors, 6 ICs, 3 switches, 3 diodes and 2 connectors.

From the project

Troika hardware accelerator for ice40 FPGAs

This is an implementation of the Troika hashing algorithmus on ICE40 FPGAs.

The repository is intended to be used by developers who are considering using Troika in their hardware projects. The board-files are from a PoC which can be used as design example.

It's not a high-performance solution because it needs multiple clock-cycles per hash-round and the implementation is heavily restricted by logic resources and achievable speed of ICE40 FPGAs. But the FPGA is very cheap, the PCB can be done by any cheap chinese manufacturer and soldering is doable with a bit of practice. And it's a lot…

Main components on the Troika ice40

Troika ice40 bill of materials (BOM)

73 components, 27 distinct parts.

QtyPartRefs
1
ice40up5k
U1
1
USBLC6-2SC6
U3
1
STM32F302CCT6
U4
1
SIM808
U5
1
LP2985-3.3
U6
1
MIC5504-1.2YM5
U7
1
ASE-xxxMHz
X1
1
10104110-0001LF
P1
1
CONN_01X05
P2
3
KMR2
SW1, SW2, SW3
1
D
D1
2
LED
D2, D3
7
1µ
C1, C2, C10, C11, C32, C34, C35
2
10µ
C3, C36
15
100n
C4, C5, C6, C7, C12, C13, C16, C19 +7
5
10n
C8, C9, C14, C15, C18
4
47µ
C17, C28, C29, C30
1
4.7µ/X5R
C21
2
47p
C22, C23
10
10k
R1, R2, R4, R6, R7, R9, R12, R18 +2
Show 7 more
QtyPartRefs
1
100
R3
1
100k
R5
4
22
R8, R11, R13, R20
1
1k5
R10
2
270
R14, R21
1
1
R15
2
33
R16, R17

Troika ice40 design files

The KiCad project lives in the aliakseimakarau/troika_ice40 repository on GitHub; these links point at the commit this page was built from.

Troika ice40: common questions

What microcontroller does the Troika ice40 use?

The Troika ice40 is built around the ice40up5k, from the FPGA family.

How big is the Troika ice40 PCB?

The Troika ice40 measures 68 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Troika ice40?

73 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the Troika ice40 design files?

From the aliakseimakarau/troika_ice40 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Troika ice40 design in my own project?

The repository has no license, so all rights stay with aliakseimakarau. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Troika ice40 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.

Similar boards