12 open source boards using the SIM808
Real designs built with the SIM808, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
GPS-Tracker
mohamedboubaker
35 × 53 mm53 parts2LNo license40AVR/Arduino
Gpstracker
blemasle
79.3 × 59.2 mm65 parts2LMIT33STM32
GPS-Tracker
ibfarhat
35 × 53 mm53 parts2LNo license3ESP8266
UnderControl Hardware Design
YamanSeyravan
100 × 100 mm185 parts4LGPL-3.02STM32
KICAD-STM32-GPS-Tracker-Project
Saie12
43.5 × 58.5 mm55 parts4LNo license2STM32
Project-09
ampnics
42.5 × 58.5 mm51 parts4LNo license2STM32
STM32 gps tracker
hammadurrehman2006
46 × 60.3 mm53 parts4LNo license1STM32
STM32 GPS Tracking Module
tejashviraj19
42.5 × 58.5 mm51 parts4LNo license1FPGA
Troika ice40
aliakseimakarau
68 × 38 mm73 parts2LNo license0STM32
GPS-Tracker
HarshBihani18
35 × 53 mm53 parts2LNo license0STM32
GPS TRACKER
HarshaKaushalya
42.5 × 58.5 mm53 parts4LNo license0STM32
STM32 GPS TRACKER
Sirucha16
42.5 × 58.5 mm51 parts4LNo license0
How designs wire the SIM808
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the SIM808 connects to, and the resistors, capacitors and other passives placed on it.
- The SIM_DATA pin has a series resistor on 10 of 11 designs, most often 10 kΩ (then 22 Ω).
- The SIM_CLK pin has a series resistor on 10 of 11 designs, most often 10 kΩ (then 22 Ω).
- The SIM_RST pin has a series resistor on 10 of 11 designs, most often 10 kΩ (then 22 Ω).
- The RFSYNC pin is left unconnected on 11 of 11 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 2, 3, 18, 28, 34, 36, 40, 51, 52, 54, 64, 65, 67, 68 | Connected to: GND 100% | — |
| VBATpin 4, 5, 6 | Connected to: 3.3V 100% |
|
| VDD_EXTpin 7 | Connected to: Signal 82% |
|
| DTRpin 9 | Connected to: Not connected 91% | — |
| RIpin 10 | Connected to: Not connected 82% · a signal 18% | — |
| DCDpin 11 | Connected to: Not connected 91% | — |
| CTSpin 12 | Connected to: Not connected 91% | — |
| RTSpin 13 | Connected to: Not connected 82% · a signal 18% | — |
| VRTCpin 17 | Connected to: 4U7 27% |
|
| MIC1Ppin 19 | Connected to: Not connected 91% | — |
| MIC1Npin 20 | Connected to: Not connected 91% | — |
| SPK1Ppin 21 | Connected to: Not connected 91% | — |
| SPK1Npin 22 | Connected to: Not connected 91% | — |
| ADC0pin 23 | Connected to: Not connected 91% | — |
| ADC1pin 24 | Connected to: Not connected 91% | — |
| VCHGpin 25 | Connected to: Not connected 91% | — |
| USB_DPpin 26 | Connected to: Not connected 91% | — |
| USB_DNpin 27 | Connected to: Not connected 91% | — |
| SIM_VDDpin 29 | Connected to: SMF05CT1G 91%, a connector 91%, 1u 27% |
|
| SIM_DATApin 30 | Connected to: 22P 27% |
|
| SIM_CLKpin 31 | Connected to: Signal 100% |
|
| SIM_RSTpin 32 | Connected to: Signal 100% |
|
| SIM_DETpin 33 | Connected to: SMF05CT1G 82%, a connector 82% · not connected 18% |
|
| 1PPSpin 37 | Connected to: Not connected 91% | — |
| SDApin 38 | Connected to: Not connected 91% | — |
| SCLpin 39 | Connected to: Not connected 91% | — |
| PWM2pin 41 | Connected to: Not connected 91% | — |
| PWM1pin 42 | Connected to: Not connected 91% | — |
| GPIO19pin 43 | Connected to: Not connected 91% | — |
| GPIO17pin 44 | Connected to: Not connected 91% | — |
| PCM_SYNCpin 45 | Connected to: Not connected 91% | — |
| PCM_CLKpin 46 | Connected to: Not connected 91% | — |
| PCM_INpin 47 | Connected to: Not connected 91% | — |
| PCM_OUTpin 48 | Connected to: Not connected 91% | — |
| NETLIGHTpin 50 | Connected to: Not connected 82% · a signal 18% | — |
| BT_ANTpin 53 | Connected to: Not connected 91% | — |
| KBR3pin 55 | Connected to: Not connected 91% | — |
| KBR2pin 56 | Connected to: Not connected 91% | — |
| KBR1pin 57 | Connected to: Not connected 91% | — |
| KBR0pin 58 | Connected to: Not connected 91% | — |
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GPS-Tracker by mohamedboubaker, Gpstracker by blemasle, GPS-Tracker by ibfarhat and Project-09 by ampnics.
The SIM808 in open source designs
The gallery holds 12 open source boards using the SIM808 from 12 GitHub repositories; a typical one measures about 42.5 × 58.5 mm and carries around 53 components.
58% use four copper layers or more, and 17% carry an open source license.
The most starred is GPS-Tracker by mohamedboubaker.
Parts used alongside the SIM808
Microcontrollers on boards using the SIM808
What boards using the SIM808 are built for
SIM808: common questions
Where can I find a SIM808 reference design?
Each of the 12 boards on this page is a real design using the SIM808. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the SIM808 SIM_DATA pin?
The SIM_DATA pin has a series resistor on 10 of 11 designs, most often 10 kΩ (then 22 Ω). Counted from the KiCad layouts of 12 open source designs using the SIM808.
What resistor goes on the SIM808 SIM_CLK pin?
The SIM_CLK pin has a series resistor on 10 of 11 designs, most often 10 kΩ (then 22 Ω). Counted from the KiCad layouts of 12 open source designs using the SIM808.
What resistor goes on the SIM808 SIM_RST pin?
The SIM_RST pin has a series resistor on 10 of 11 designs, most often 10 kΩ (then 22 Ω). Counted from the KiCad layouts of 12 open source designs using the SIM808.
What parts are used alongside the SIM808?
The SMF05CT1G, TPS5430DDA, STM32F030C8TX, 100N and 100U appear in the most repositories here.
Which microcontrollers do boards using the SIM808 use?
Most are built on STM32 (9), AVR/Arduino (1), ESP8266 (1) and FPGA (1).
How big is a typical board using the SIM808?
The median is 42.5 × 58.5 mm, and 42% are two-layer designs.
What is the most popular open source board using the SIM808?
By GitHub stars, GPS-Tracker by mohamedboubaker, with 40 stars.
Can I simulate one of these boards using the SIM808 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.