Is it a guitar
AlteranteTony·is-it-a-guitar·PCB&SCHEMATIC-ediatble file/MY_MIDI.kicad_sch

About the Is it a guitar PCB
Is it a guitar is an open source ESP32 PCB design by AlteranteTony, published on GitHub. It is a board, with 7 components from 5 distinct parts.
Its main chip is the XIAO-ESP32-S3-SMD, from the ESP32 family. By type, the board carries 4 switches, 1 IC and 1 connector.
It belongs with the audio, keyboards and iot & wireless designs in this gallery.
From the project
it plays music, looks like guitar but isn't
YOU MAY CUSTOMIZE THIS PROJECT IN ANY WAY YOU LIKE
PCB WAS CHECKED FOR ERRORS USING KI CAD'S DRC. CHECK PCB FOR ERROR BEFORE MANUFACTURING THE PCB
Main components on the Is it a guitar
Is it a guitar bill of materials (BOM)
7 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-S3-SMD | XIAO ESP32-S3 | U1 |
| 1 | Conn_01x05 | capacitve keys | J2 |
| 1 | R_Potentiometer_MountingPin | Potentiometer_Bourns_PTA1543_Single_Slide | RV1 |
| 3 | SW_Push | Kailh Choc Low-Profile Switches | SW1, SW2, SW3 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW4 |
Is it a guitar design files
The KiCad project lives in the AlteranteTony/is-it-a-guitar repository on GitHub; these links point at the commit this page was built from.
Is it a guitar: common questions
What microcontroller does the Is it a guitar use?
The Is it a guitar is built around the XIAO-ESP32-S3-SMD, from the ESP32 family.
How many components are on the Is it a guitar?
7 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Is it a guitar design files?
From the AlteranteTony/is-it-a-guitar repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Is it a guitar design in my own project?
The repository has no license, so all rights stay with AlteranteTony. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Is it a guitar without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k