40 open source boards using the XIAO-ESP32-S3-SMD
Real designs built with the XIAO-ESP32-S3-SMD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Acw02 zb
Fabiancrg
53.5 × 33 mm30 parts2LCustom license2ESP32
Bonsai
devvazquez
41 × 23 mm6 parts2LMIT1ESP32
Nudge
TheOtherTwinCoder
31 × 42.6 mm4 parts2LNo license1ESP32
Freewheel shift
pgmcgee
25 × 35 mm3 parts2LMIT1ESP32
BlueBuzzah-Hardware
BlueBuzzah
42 × 42 mm59 parts2LMIT0ESP32
Keychu
dialgorithm
144.5 × 87.5 mm50 parts2LNo license0ESP32
Badascule bridge
teste80
80 × 50 mm28 parts2LCC-BY-NC-4.00ESP32
Mica
dialgorithm
36.8 × 36.6 mm16 parts2LNo license0ESP32
Smart poop bucket
peterxn123
49 × 23 mm11 parts2LNo license0ESP32
Cam
Anayjain1129
90.2 × 62.8 mm10 parts2LNo license0ESP32
Chordial
ye8um
94 × 74 mm9 parts2LNo license0ESP32
Ai plant pot
Flamebamboo
30 × 58 mm5 parts2LNo license0- schematic only · 7 partsESP32
Is it a guitar
AlteranteTony
7 partsNo license0 ESP32
Ultraterm nobites
jamdotjar
68 × 65.6 mm11 parts2LCC-BY-SA-4.08ESP32
UWB Fly
DynamicWhiteHat
38 × 38 mm19 parts2LNo license4RP2040/RP2350
XIAO
Cocotrilito
203.1 × 125.1 mm21 parts2LMIT0ESP32
Basic rgb
FromDarkHell
49.5 × 37.3 mm7 parts2LNo license2ESP32
4x Mini Controller
sullyjason
76.4 × 111.6 mm26 parts2LNo license1ESP32
Interactiles Controller
sullyjason
62.5 × 103.3 mm25 parts2LNo license1ESP32
ブレッドボード 2
torica-org
100 × 23.5 mm10 parts2LNo license0RP2040/RP2350
XIAO
dhirptl
203.1 × 125.1 mm21 parts2LMIT3RP2040/RP2350
XIAO
Videocraft10
203.1 × 125.1 mm21 parts2LMIT2RP2040/RP2350
XIAO
feastorg
203.1 × 125.1 mm21 parts2LCC0-1.01RP2040/RP2350
XIAO
sinismylastname
203.1 × 125.1 mm21 parts2LNo license1RP2040/RP2350
XIAO
AM1NOM
203.1 × 125.1 mm21 parts2LMIT0RP2040/RP2350
XIAO
joshujo
203.1 × 125.1 mm21 parts2LNo license0RP2040/RP2350
XIAO
newtontriumphant
203.1 × 125.1 mm21 parts2LNo license0RP2040/RP2350
XIAO
realBoltDev
203.1 × 125.1 mm21 parts2LNo license0RP2040/RP2350
XIAO
jadenvv
203.1 × 125.1 mm21 parts2LNo license1Nordic nRF
XIAO
sbunger
203.1 × 125.1 mm21 parts2LGPL-3.00RP2040/RP2350
XIAO
Protract-123
203.1 × 125.1 mm21 parts2LNo license0RP2040/RP2350
XIAO
samanbeer
203.1 × 125.1 mm21 parts2LNo license0RP2040/RP2350
XIAO
DwayneCrous
203.1 × 125.1 mm21 parts2LNo license0ESP32
4x Mini Controller Wired
sullyjason
76.4 × 90.8 mm21 parts2LNo license1ESP32
Esp32s3-main v1
Netetra
34 × 56 mm22 parts4LNo license0RP2040/RP2350
XIAO
tomonoriyamazaki
203.1 × 125.1 mm21 parts2LNo license0
How designs wire the XIAO-ESP32-S3-SMD
Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the XIAO-ESP32-S3-SMD connects to, and the resistors, capacitors and other passives placed on it.
- The 3V3 pin is tied to 3.3V on 14 of 19 designs (not connected on 3, a signal on 2).
- The MTDI pin is left unconnected on 13 of 15 designs (a signal on 2).
- The CHIP_EN pin is left unconnected on 13 of 15 designs (a signal on 2).
- The MTMS pin is left unconnected on 12 of 15 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3pin 12 | Connected to: 3.3V 74% · not connected 16% | — |
| GND_13pin 13 | Connected to: GND 79% · a signal 16% | — |
| BATpin 15 | Connected to: Not connected 67% · a signal 27% | — |
| GNDpin 16, 20 | Connected to: Not connected 73% | — |
| MTDIpin 17 | Connected to: Not connected 87% | — |
| MTDOpin 18 | Connected to: Not connected 67% · a signal 20% | — |
| CHIP_ENpin 19 | Connected to: Not connected 87% | — |
| MTMSpin 21 | Connected to: Not connected 80% · a signal 20% | — |
| MTCKpin 22 | Connected to: Not connected 80% · a signal 20% | — |
| VBAT_23pin 23 | Connected to: Not connected 60% · a signal 33% | — |
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ultraterm nobites by jamdotjar, UWB Fly by DynamicWhiteHat, Acw02 zb by Fabiancrg and Basic rgb by FromDarkHell.
The XIAO-ESP32-S3-SMD in open source designs
The gallery holds 40 open source boards using the XIAO-ESP32-S3-SMD from 36 GitHub repositories; a typical one measures about 90.2 × 87.5 mm and carries around 21 components.
97% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is XIAO by Josephrp.
Parts used alongside the XIAO-ESP32-S3-SMD
Microcontrollers on boards using the XIAO-ESP32-S3-SMD
What boards using the XIAO-ESP32-S3-SMD are built for
XIAO-ESP32-S3-SMD: common questions
Where can I find a XIAO-ESP32-S3-SMD reference design?
Each of the 40 boards on this page is a real design using the XIAO-ESP32-S3-SMD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the XIAO-ESP32-S3-SMD 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 14 of 19 designs (not connected on 3, a signal on 2). Counted from the KiCad layouts of 19 open source designs using the XIAO-ESP32-S3-SMD.
How is the XIAO-ESP32-S3-SMD MTDI pin connected?
The MTDI pin is left unconnected on 13 of 15 designs (a signal on 2). Counted from the KiCad layouts of 19 open source designs using the XIAO-ESP32-S3-SMD.
How is the XIAO-ESP32-S3-SMD CHIP_EN pin connected?
The CHIP_EN pin is left unconnected on 13 of 15 designs (a signal on 2). Counted from the KiCad layouts of 19 open source designs using the XIAO-ESP32-S3-SMD.
What parts are used alongside the XIAO-ESP32-S3-SMD?
The XIAO-ESP32-C3-DIP, XIAO-ESP32-C3-SMD, XIAO-ESP32-C5-SMD, XIAO-ESP32-C6-DIP and XIAO-ESP32-C6-SMD appear in the most repositories here.
Which microcontrollers do boards using the XIAO-ESP32-S3-SMD use?
Most are built on ESP32 (25), RP2040/RP2350 (14) and Nordic nRF (1).
How big is a typical board using the XIAO-ESP32-S3-SMD?
The median is 90.2 × 87.5 mm, and 97% are two-layer designs.
What is the most popular open source board using the XIAO-ESP32-S3-SMD?
By GitHub stars, XIAO by Josephrp, with 12 stars.
Can I simulate one of these boards using the XIAO-ESP32-S3-SMD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.