Batteryboard
About the Batteryboard PCB
Batteryboard is an open source PCB design by alxklso, published on GitHub under the MIT license. It is a 2-layer board measuring 95.9 × 90.2 mm, with 26 components from 12 distinct parts.
Other key parts include the R5460N233AF-TR-FE. By type, the board carries 10 connectors, 4 test points, 4 capacitors, 4 resistors, 2 transistors and 1 IC.
It belongs with the power & battery, rf & radio and science & space designs in this gallery.
From the project
This is the repo for the Isomer Space Program (ISP) 1U CoyoteSat CubeSat mission.
This repo contains: - [mainboard-v05]: PyCubed V5 Mainboard - [batt-board]: PyCubed V1b Battery Board - [software]: PyCubed Flight Software - [cosmic-watch]: Cosmic Watch (payload) - [solar-panels]: Solar Panel PCBs - [antenna]: Antenna PCBs - [bottom-adapter]: Bottom adapter plate w/ solar cells - [ISP.pretty]: Custom KiCad footprint library - [datasheets]: Datasheets for components - [firmware]: Firmware for PyCubed V5 board - [pics]: Progress pics of the CubeSat
Main components on the Batteryboard
Batteryboard bill of materials (BOM)
26 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R5460N233AF-TR-FE R5460N233AF | SOT95P280X130-6N | U1 |
| 2 | IRF7458 | SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q2 |
| 4 | 1042 KEYSTONE-1042 | KEYSTONE-1042 | J1, J2, J3, J4 |
| 1 | JST_PH_S2B-PH-SM4 | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J7 |
| 4 | Screw_Terminal_01x02 | SCREWTERMINAL-3.5MM-2_LOCK | J8, J9, J10, J11 |
| 1 | Screw_Terminal_01x01 | PinHeader_1x01_P1.00mm_Vertical | J12 |
| 1 | Thermistor | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical | TH1 |
| 4 | TestPoint | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1, TP2, TP3, TP4 |
| 4 | 0.1UF 0.1uF | C_0603_1608Metric | C1, C2, C3, C4 |
| 2 | 330 | R_0603_1608Metric | R1, R2 |
| 1 | LR2512-23R010F4 0.01 | R_2512_6332Metric | R3 |
| 1 | LR2512-23R010F4 1K | R_0603_1608Metric | R4 |
Batteryboard design files
The KiCad project lives in the alxklso/ISP-cubesat repository on GitHub; these links point at the commit this page was built from.
Batteryboard: common questions
How big is the Batteryboard PCB?
The Batteryboard measures 95.9 × 90.2 mm, has 2 copper layers and is 1.5748 mm thick.
How many components are on the Batteryboard?
26 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Batteryboard design files?
From the alxklso/ISP-cubesat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Batteryboard design in my own project?
Yes, under the terms of its MIT license, which alxklso chose for the repository.
More boards in ISP-cubesat
Microchip SAMMainboard
90.2 × 95.9 mm196 parts4LMIT1
Solar Cell PCB (USB side)
80 × 103.5 mm9 parts2LMIT1
New new solar cell-RIP-burn wire
80 × 103.5 mm9 parts2LMIT1
Solar Cell PCB (USB side)
80 × 103.5 mm9 parts2LMIT1
Bottom adapter
97 × 97 mm5 parts2LMIT1
Updated Antenna
97 × 97 mm3 parts2LMIT1
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k