Vergelink

amalnathkp13-boop·vergelink·kicad/VergeLink_Mainboard.kicad_pcb

Vergelink

About the Vergelink PCB

Vergelink is an open source ESP32 PCB design by amalnathkp13-boop, published on GitHub. It is a 2-layer board, with 21 components from 15 distinct parts.

Its main chip is the ESP32-WROOM-32 DevKit (used pins), from the ESP32 family. Other key parts include the MCP1700T-3302E/TT. By type, the board carries 7 capacitors, 5 modules, 4 resistors, 2 ICs, 1 connector and 1 switch.

It belongs with the iot & wireless designs in this gallery.

From the project

VergeLink - camera-free eye-vergence + jaw-clench control of fan and light for people with quadriplegia (Vishwakarma Awards 2026-27, Stage 2)

Camera-free eye-vergence + jaw-clench control of a fan and a light for people with quadriplegia. Vishwakarma Awards 2026-27 — Stage 2 submission.

VergeLink lets a person who can still move their eyes and jaw switch their own fan and light. The user looks at a FAN or LIGHT target. Two-channel EOG (eye direction + vergence) and a ToF depth sensor must agree on one target. A deliberate jaw clench (EMG) confirms it, and a SONOFF DUALR3 relay switches the appliance over home Wi-Fi.

Main components on the Vergelink

MCP1700T-3302E/TTESP32-WROOM-32 DevKit (used pins)

Vergelink bill of materials (BOM)

21 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP1700T-3302E/TT
U1
1
ESP32-WROOM-32 DevKit (used pins)
U2
1
BioAmp EXG Pill - LEFT EOG
M1
1
BioAmp EXG Pill - RIGHT EOG
M2
1
Muscle BioAmp BisCute - JAW EMG
M3
1
VL53L5CX ToF breakout (forehead pod)
M4
1
MPU6500 GY-6500 IMU (forehead pod)
M5
1
5V in
J1
1
PSB-110 DISARM
SW1
1
Red 5mm STATUS
D1
2
1uF X7R
C1, C2
1
10uF 25V
C3
4
100nF
C4, C5, C6, C7
3
1k
R1, R2, R3
1
330R
R4

Vergelink design files

The KiCad project lives in the amalnathkp13-boop/vergelink repository on GitHub; these links point at the commit this page was built from.

Vergelink: common questions

What microcontroller does the Vergelink use?

The Vergelink is built around the ESP32-WROOM-32 DevKit (used pins), from the ESP32 family.

How big is the Vergelink PCB?

The Vergelink has 2 copper layers and is 1.6 mm thick.

How many components are on the Vergelink?

21 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Vergelink design files?

From the amalnathkp13-boop/vergelink repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Vergelink design in my own project?

The repository has no license, so all rights stay with amalnathkp13-boop. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Vergelink without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards