BOB RP2040-DevBoard

AmazingWings·BOB_RP2040-DevBoard·Hardware/RP2040_dev.kicad_pcb

About the BOB RP2040-DevBoard PCB

BOB RP2040-DevBoard is an open source RP2040/RP2350 PCB design by AmazingWings, published on GitHub under the MIT license. It is a 2-layer board measuring 23.1 × 56.1 mm, with 33 components from 16 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700X-330XXTT and W25Q16JVSS. By type, the board carries 15 capacitors, 7 resistors, 4 connectors, 3 ICs, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

BOB_RP2040 DevBoard

This folder contains all the necessary production files required to manufacture the RP2040 BOB devboard.

If you want to order this board, simply drag and drop the entire folder into JLCPCB. Their system will automatically detect and compile all the necessary files you need for production.

BOM (Bill of Materials): Provided in standard .csv` format, ready for component sourcing and assembly.

Main components on the BOB RP2040-DevBoard

RP2040 MCP1700X-330XXTT W25Q16JVSS

BOB RP2040-DevBoard bill of materials (BOM)

33 components, 16 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	RP2040	QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm	U1
1	MCP1700X-330XXTT MCP1700x-330xxTT	SOT-23	U2
1	W25Q16JVSS	Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm	U4
1	12MHZ 12mhz	Crystal_SMD_3225-4Pin_3.2x2.5mm	Y1
1	USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P	USB_C_Receptacle_HRO_TYPE-C-31-M-12	J1
2	CONN_01X20 Conn_01x20	PinHeader_1x20_P2.54mm_Vertical	J2, J4
1	CONN_01X03 Conn_01x03	PinHeader_1x03_P2.54mm_Vertical	J3
2	33pF	C_0402_1005Metric	33pF2, 33pF3
1	SW_Push	SW_Push_SPST_NO_Alps_SKRK	SW1
12	0.1UF 0.1uF	C_0402_1005Metric	C1, C2, C3, C4, C5, C6, C7, C8 +4
1	1UF 1uF	C_0402_1005Metric	C10
2	10UF 10uF	C_0603_1608Metric	C13, C14
2	5.1K	R_0402_1005Metric	R1, R2
2	27	R_0402_1005Metric	R3, R4
2	1K	R_0402_1005Metric	R5, R6
1	10K	R_0402_1005Metric	R7

BOB RP2040-DevBoard design files

The KiCad project lives in the AmazingWings/BOB_RP2040-DevBoard repository on GitHub; these links point at the commit this page was built from.

BOB RP2040-DevBoard: common questions

What microcontroller does the BOB RP2040-DevBoard use?

The BOB RP2040-DevBoard is built around the RP2040, from the RP2040/RP2350 family.

How big is the BOB RP2040-DevBoard PCB?

The BOB RP2040-DevBoard measures 23.1 × 56.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BOB RP2040-DevBoard?

33 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the BOB RP2040-DevBoard design files?

From the AmazingWings/BOB_RP2040-DevBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the BOB RP2040-DevBoard design in my own project?

Yes, under the terms of its MIT license, which AmazingWings chose for the repository.

Can I test firmware for the BOB RP2040-DevBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.