SOB HoldBackTheDarknessTracker
AmericanLuchador·SOB_HoldBackTheDarknessTracker·schematic/HBTD.kicad_pcb
About the SOB HoldBackTheDarknessTracker PCB
SOB HoldBackTheDarknessTracker is an open source ESP32 PCB design by AmericanLuchador, published on GitHub. It is a 2-layer board measuring 104.8 × 41 mm, with 21 components from 5 distinct parts.
Its main chip is the MOUDLE-SEEEDUINO-XIAO-ESP32C3, from the ESP32 family. By type, the board carries 12 resistors, 6 switches, 1 IC and 1 connector.
It belongs with the displays & leds designs in this gallery.
From the project
In the winter quarter of 2025, I took a Principles of Computer Science class, which taught the basics of the Python programming language. To practice what I learned, I built a simple dice roller on my PC. I wanted it to be more purpose-built, so I expanded it to return specific r
In the winter quarter of 2025, I took a Principles of Computer Science class, which taught the basics of the Python programming language. To practice what I learned, I built a simple dice roller on my PC. I wanted it to be more purpose-built, so I expanded it to return specific results based on the Hold Back the Darkness feature of my favorite board game, Shadows of Brimestone. It was a simple build but I wanted something smaller and portable, which is where the ESP32S3 came in. Long story short, I wired up the ESP32S3 with some buttons, an LCD display, and a NeoPixel ring before rewriting…
Main components on the SOB HoldBackTheDarknessTracker
SOB HoldBackTheDarknessTracker bill of materials (BOM)
21 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MOUDLE-SEEEDUINO-XIAO-ESP32C3 | MCU_Seeed_ESP32C3 | U1 |
| 1 | Conn_01x03_Pin | PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x08_Pin_ST7789V | PinSocket_1x08_P2.54mm_Vertical | ST7789VConnector1 |
| 6 | SW_MEC_5E | SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6 |
| 12 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +4 |
SOB HoldBackTheDarknessTracker design files
The KiCad project lives in the AmericanLuchador/SOB_HoldBackTheDarknessTracker repository on GitHub; these links point at the commit this page was built from.
- Layoutschematic/HBTD.kicad_pcb
- Schematicschematic/HBTD.kicad_sch
SOB HoldBackTheDarknessTracker: common questions
What microcontroller does the SOB HoldBackTheDarknessTracker use?
The SOB HoldBackTheDarknessTracker is built around the MOUDLE-SEEEDUINO-XIAO-ESP32C3, from the ESP32 family.
How big is the SOB HoldBackTheDarknessTracker PCB?
The SOB HoldBackTheDarknessTracker measures 104.8 × 41 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SOB HoldBackTheDarknessTracker?
21 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the SOB HoldBackTheDarknessTracker design files?
From the AmericanLuchador/SOB_HoldBackTheDarknessTracker repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SOB HoldBackTheDarknessTracker design in my own project?
The repository has no license, so all rights stay with AmericanLuchador. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SOB HoldBackTheDarknessTracker without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k