HardLabs

Wled esp01-controller

amitesh-singh·kicad-pcbs·projects/wled-esp01-controller/wled-esp01-controller.kicad_pcb

Wled esp01-controller PCB layout, top view — open source ESP8266 board by amitesh-singh

About the Wled esp01-controller PCB

Wled esp01-controller is an open source ESP8266 PCB design by amitesh-singh, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 38.5 × 33 mm, with 9 components from 7 distinct parts.

Its main chip is the ESP-01, from the ESP8266 family. Other key parts include the AMS1117-3.3. By type, the board carries 3 resistors, 2 ICs, 2 connectors and 2 capacitors.

From the project

A place to play with Kicad

sabor awesome shift register boards http://repos.borg.ch/projects/pcbs/trunk/shiftregs/doc/shiftregs.sch.svg http://repos.borg.ch/projects/pcbs/trunk/shiftregs/doc/shiftregsbidi.sch.svg http://repos.borg.ch/projects/pcbs/trunk/shiftregs/doc/shiftregs_bidi.html

$ gsettings set org.gnome.settings-daemon.plugins.xsettings overrides "{'Gtk/ButtonImages': , 'Gtk/MenuImages': }"

Main components on the Wled esp01-controller

AMS1117-3.3ESP-01

Wled esp01-controller bill of materials (BOM)

9 components, 7 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
ESP-01
U2
1
InputPowerPins
J1
1
WLED
J2
1
10uF
C1
1
22uF
C2
3
R
R1, R2, R3

Wled esp01-controller design files

The KiCad project lives in the amitesh-singh/kicad-pcbs repository on GitHub; these links point at the commit this page was built from.

Wled esp01-controller: common questions

What microcontroller does the Wled esp01-controller use?

The Wled esp01-controller is built around the ESP-01, from the ESP8266 family.

How big is the Wled esp01-controller PCB?

The Wled esp01-controller measures 38.5 × 33 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Wled esp01-controller?

9 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Wled esp01-controller design files?

From the amitesh-singh/kicad-pcbs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Wled esp01-controller design in my own project?

Yes, under the terms of its GPL-3.0 license, which amitesh-singh chose for the repository.

Can I test firmware for the Wled esp01-controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in kicad-pcbs

Similar boards