BLARE

amkachouh·BLARE·PCB/BLARE.kicad_pcb

BLARE PCB layout, top view — open source ESP32 board by amkachouh

About the BLARE PCB

BLARE is an open source ESP32 PCB design by amkachouh, published on GitHub. It is a 2-layer board measuring 90 × 53.2 mm, with 7 components from 4 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. By type, the board carries 4 switches, 1 IC, 1 connector and 1 buzzer.

BLARE, from the project README
From the project README

Main components on the BLARE

BLARE bill of materials (BOM)

7 components, 4 distinct parts.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
Conn_01x08_Pin
J1
1
Buzzer
BZ1
4
SW_Push
SW1, SW2, SW3, SW4

BLARE design files

The KiCad project lives in the amkachouh/BLARE repository on GitHub; these links point at the commit this page was built from.

BLARE: common questions

What microcontroller does the BLARE use?

The BLARE is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the BLARE PCB?

The BLARE measures 90 × 53.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BLARE?

7 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the BLARE design files?

From the amkachouh/BLARE repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the BLARE design in my own project?

The repository has no license, so all rights stay with amkachouh. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the BLARE without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards