184 open source boards using the XIAO-ESP32-C3-SMD

Real designs built with the XIAO-ESP32-C3-SMD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

184 boardsClear filters|Most starred

How designs wire the XIAO-ESP32-C3-SMD

Read from the KiCad layouts of 160 open source designs, one per repository: what each pin of the XIAO-ESP32-C3-SMD connects to, and the resistors, capacitors and other passives placed on it.

  • The 3V3_OUT_12 pin is tied to 3.3V on 148 of 159 designs (not connected on 4, a signal on 6).
  • The D9/BOOT_10 pin is left unconnected on 126 of 159 designs (a signal on 32).
  • The D8_9 pin is left unconnected on 121 of 159 designs (a signal on 38).
  • The D7_8 pin is left unconnected on 116 of 159 designs (a signal on 43).
D0_1pin 1Connected to: Not connected 66% · a signal 34%
D1_2pin 2Connected to: DHT11 55%
  • Pull-up to 3.3V on 57% · 10 kΩ (85), 47 kΩ (1), 100 kΩ (1)
D6_7pin 7Connected to: Not connected 69% · a signal 31%
D7_8pin 8Connected to: Not connected 73% · a signal 27%
D8_9pin 9Connected to: Not connected 76% · a signal 24%
D9/BOOT_10pin 10Connected to: Not connected 79% · a signal 20%
D10_11pin 11Connected to: Not connected 66% · a signal 33%
3V3_OUT_12pin 12Connected to: 3.3V 93%
GND_13pin 13Connected to: GND 94%
VBUS_14pin 14Connected to: 5V 72% · not connected 25%
D3/MTDI_15pin 15Connected to: Not connected 87%
D5/MTDO_16pin 16Connected to: Not connected 89%
EN_17pin 17Connected to: Not connected 100%
GND_18pin 18Connected to: GND 70% · not connected 30%
D2/MTMS_19pin 19Connected to: Not connected 100%
D4/MTCK_20pin 20Connected to: Not connected 99%
VBAT_21pin 21Connected to: Not connected 83%
GND_22pin 22Connected to: Not connected 63% · GND 32%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Desk buddy by aryanscodingden, Smart-Gloves by Adnanosman9, Starbie by AlteranteTony and Psyduck gotchi by Er1n-jpg.

The XIAO-ESP32-C3-SMD in open source designs

The gallery holds 184 open source boards using the XIAO-ESP32-C3-SMD from 178 GitHub repositories; a typical one measures about 96.6 × 84.5 mm and carries around 7 components.

100% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is XIAO by Josephrp.

Microcontrollers on boards using the XIAO-ESP32-C3-SMD

XIAO-ESP32-C3-SMD: common questions

Where can I find a XIAO-ESP32-C3-SMD reference design?

Each of the 184 boards on this page is a real design using the XIAO-ESP32-C3-SMD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the XIAO-ESP32-C3-SMD 3V3_OUT_12 pin connected?

The 3V3_OUT_12 pin is tied to 3.3V on 148 of 159 designs (not connected on 4, a signal on 6). Counted from the KiCad layouts of 160 open source designs using the XIAO-ESP32-C3-SMD.

How is the XIAO-ESP32-C3-SMD D9/BOOT_10 pin connected?

The D9/BOOT_10 pin is left unconnected on 126 of 159 designs (a signal on 32). Counted from the KiCad layouts of 160 open source designs using the XIAO-ESP32-C3-SMD.

How is the XIAO-ESP32-C3-SMD D8_9 pin connected?

The D8_9 pin is left unconnected on 121 of 159 designs (a signal on 38). Counted from the KiCad layouts of 160 open source designs using the XIAO-ESP32-C3-SMD.

What parts are used alongside the XIAO-ESP32-C3-SMD?

The DHT11, XIAO-ESP32-C3-DIP, XIAO-ESP32-C5-SMD, XIAO-ESP32-C6-DIP and XIAO-ESP32-C6-SMD appear in the most repositories here.

Which microcontrollers do boards using the XIAO-ESP32-C3-SMD use?

Most are built on ESP32 (168), RP2040/RP2350 (15) and Nordic nRF (1).

How big is a typical board using the XIAO-ESP32-C3-SMD?

The median is 96.6 × 84.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the XIAO-ESP32-C3-SMD?

By GitHub stars, XIAO by Josephrp, with 12 stars.

Can I simulate one of these boards using the XIAO-ESP32-C3-SMD before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part