Capstone pdm
ammar0xff·capstone-pdm·circuit/out/pdm.net
About the Capstone pdm PCB
Capstone pdm is an open source Raspberry Pi PCB design by ammar0xff, published on GitHub. It is a board, with 13 components from 11 distinct parts.
Its main chip is the RPi4-4GB, from the Raspberry Pi family. Other key parts include the ADXL345, MAX6675 and INMP441. By type, the board carries 4 ICs, 4 capacitors, 3 resistors, 1 fuse and 1 diode.
From the project
AI-driven edge PdM on Raspberry Pi 4 4GB. Offline-first, 0-EGP cloud mirror. Budget: 9,370 EGP signed ceiling — planned 9,368.25 from real 2026-10-25 quotes. The MAX6675 is a 200 allowance that must be quoted ≤201.75. 0 EGP cloud.
AI-driven edge PdM on Raspberry Pi 4 4GB. Offline-first, 0-EGP cloud mirror. Budget: 9,370 EGP signed ceiling — planned 9,368.25 from real 2026-10-25 quotes. The MAX6675 is a 200 allowance that must be quoted ≤201.75. 0 EGP cloud.
- 📖 Live book: GitHub Pages index.html (mirrors ProjectBook.html) - 📋 PRD: PRD.md v2.0 (Problem → Solution → Features → Grade → Technical) - 🎬 Video prompt: videoprompt.txt - 📊 Charts: bookassets/ (regenerate with python3 bookassets/makecharts.py) - 📦 BOM: DOC-20261014-WA0055.xlsx (supplier sheet) · circuit/bomtarget.csv (build list) - 📚 Sources: G1227…
Main components on the Capstone pdm
Capstone pdm bill of materials (BOM)
13 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RPi4-4GB Raspberry Pi 4 Model B 4GB | PinHeader_1x40_P2.54mm_Vertical | U1 |
| 1 | ADXL345 ADXL345 3-axis accelerometer module | ADXL345 | U2 |
| 1 | MAX6675 MAX6675 K-type thermocouple module | MAX6675 | U3 |
| 1 | INMP441 INMP441 I2S MEMS microphone | INMP441 | U4 |
| 1 | FAN-5V 5V cooling fan | Fan_5V | F1 |
| 1 | LED Status LED (salvaged) | LED_0603_1608Metric | D1 |
| 3 | 100nF 100nF X7R | C_0402_1005Metric | C1, C2, C3 |
| 1 | 10uF 10uF electrolytic | CP_Elec_4x5.4 | C4 |
| 1 | TC-K-M6 K-type probe M6 (class 1) | TC_K_M6 | R1 |
| 1 | 10k 10k pull-up (CS idle high) | R_0402_1005Metric | R2 |
| 1 | 330R 330R LED series (salvaged) | R_0402_1005Metric | R4 |
Capstone pdm design files
The KiCad project lives in the ammar0xff/capstone-pdm repository on GitHub; these links point at the commit this page was built from.
Capstone pdm: common questions
What microcontroller does the Capstone pdm use?
The Capstone pdm is built around the RPi4-4GB, from the Raspberry Pi family.
How many components are on the Capstone pdm?
13 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Capstone pdm design files?
From the ammar0xff/capstone-pdm repository on GitHub, which has a netlist and the BOM; the links under Design files point to each one.
Can I use the Capstone pdm design in my own project?
The repository has no license, so all rights stay with ammar0xff. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Capstone pdm without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507