21 open source boards using the INMP441

Real designs built with the INMP441, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

21 boardsClear filters|Most starred

How designs wire the INMP441

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the INMP441 connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 6Connected to: GND 65% · a signal 35%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Iot badge legacy by galopago, Nebula by Thecactusman0, Kicad pcm adc by s59mz and Esp32steto by VibrasticLab.

The INMP441 in open source designs

The gallery holds 21 open source boards using the INMP441 from 17 GitHub repositories; a typical one measures about 88.3 × 61.8 mm and carries around 20 components.

89% are two-layer designs, the rest use four layers or more, and 19% carry an open source license.

The most starred is Iot badge legacy by galopago.

Microcontrollers on boards using the INMP441

INMP441: common questions

Where can I find a INMP441 reference design?

Each of the 21 boards on this page is a real design using the INMP441. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the INMP441?

The MAX98357A, MAX98357AETE+T, MPU6050, TP4056 and AMS1117-3.3 appear in the most repositories here.

Which microcontrollers do boards using the INMP441 use?

Most are built on ESP32 (16), Raspberry Pi (1) and RISC-V (1).

How big is a typical board using the INMP441?

The median is 88.3 × 61.8 mm, and 89% are two-layer designs.

What is the most popular open source board using the INMP441?

By GitHub stars, Iot badge legacy by galopago, with 4 stars.

Can I simulate one of these boards using the INMP441 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part