Project-09
About the Project-09 PCB
Project-09 is an open source STM32 PCB design by ampnics, published on GitHub. It is a 4-layer board measuring 42.5 × 58.5 mm, with 51 components from 34 distinct parts.
Its main chip is the STM32F030C8TX, from the STM32 family. Other key parts include the SIM808, TPS5430DDA and SMF05CT1G. By type, the board carries 19 capacitors, 13 resistors, 5 diodes, 4 ICs, 4 connectors and 1 transistor.
It belongs with the rf & radio designs in this gallery.
From the project
Mater KiCad with Projects is a series of lectures in which we are learning PCB designing
Main components on the Project-09
Project-09 bill of materials (BOM)
51 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SIM808 | XCVR_SIM808 | U1 |
| 1 | TPS5430DDA | VREG_LM5017MR_NOPB | U2 |
| 1 | SMF05CT1G | SOT65P210X110-6N | U3 |
| 1 | STM32F030C8TX STM32F030C8Tx | LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | AO3407A | SOT95P280X125-3N | Q1 |
| 1 | 8MHZ 8MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | LEFT HEADER PINS | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | 693000000000 693010020611 | 693010020611 | J3 |
| 1 | RIGHT HEADER PINS | PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | Fuse 2.5A | Fuse_0402_1005Metric | F1 |
| 2 | U.FL-R-SMT-1 | U.FL-R-SMT-1 | GPS1, GSM1 |
| 1 | D_Zener | D_0805_2012Metric | D1 |
| 1 | B340 | D_SMC | D2 |
| 3 | LED | LED_0603_1608Metric | D3, D4, D5 |
| 1 | 15UH 15uH | L_10.4x10.4_H4.8 | L1 |
| 1 | 100U 100u | C_1206_3216Metric | C1 |
| 1 | 33P 33p | C_0402_1005Metric | C2 |
| 2 | 10P 10p | C_0402_1005Metric | C3, C11 |
| 1 | 10U 10u | C_0805_2012Metric | C4 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4U7 4u7 | C_0201_0603Metric | C5, C15 |
| 1 | 22P 22p | C_0402_1005Metric | C6 |
| 1 | 10N 10n | C_0201_0603Metric | C7 |
| 1 | 1u | C_0402_1005Metric | C8 |
| 1 | 220U 220u | CP_EIA-7343-15_Kemet-W | C9 |
| 2 | 30P 30p | C_0402_1005Metric | C10, C13 |
| 6 | 100N 100n | C_0402_1005Metric | C12, C14, C16, C17, C18, C19 |
| 1 | 4K7 | R_0402_1005Metric | R1 |
| 4 | 10K 10k | R_0402_1005Metric | R2, R3, R4, R10 |
| 1 | 8K2 | R_0805_2012Metric | R5 |
| 4 | 1K5 | R_0805_2012Metric | R6, R8, R12, R13 |
| 1 | 2K7 | R_0805_2012Metric | R7 |
| 1 | 100K | R_0201_0603Metric | R9 |
| 1 | 1K | R_0603_1608Metric | R11 |
Project-09 design files
The KiCad project lives in the ampnics/Project-09 repository on GitHub; these links point at the commit this page was built from.
Project-09: common questions
What microcontroller does the Project-09 use?
The Project-09 is built around the STM32F030C8TX, from the STM32 family.
How big is the Project-09 PCB?
The Project-09 measures 42.5 × 58.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Project-09?
51 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Project-09 design files?
From the ampnics/Project-09 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Project-09 design in my own project?
The repository has no license, so all rights stay with ampnics. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Project-09 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32Module 16S
stuartpittaway
71.1 × 89.6 mm113 parts4LCC-BY-NC-4.01.1k
STM32Djinn
tzarc
192.3 × 150.5 mm216 parts2LCERN-OHL-S-2.0988
STM32Ghoul
228.6 × 79.4 mm163 parts2LCERN-OHL-S-2.0988