Woordklok v2
amybronk·woordklok·dezine file/mainprint V2/woordklok v2/woordklok v2.kicad_pcb
About the Woordklok v2 PCB
Woordklok v2 is an open source ESP32 PCB design by amybronk, published on GitHub under the MIT license. It is a 2-layer board measuring 27.9 × 12.5 mm, with 4 components from 3 distinct parts.
Its main chip is the esp32-s3-wroom, from the ESP32 family. By type, the board carries 2 resistors, 1 IC and 1 connector.
From the project
het is een woordklok
Main components on the Woordklok v2
Woordklok v2 bill of materials (BOM)
4 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | esp32-s3-wroom | ESP32S3WROOM1 | U1 |
| 1 | 10067847-301RLF USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 2 | 10K 22R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2 |
Woordklok v2 design files
The KiCad project lives in the amybronk/woordklok repository on GitHub; these links point at the commit this page was built from.
Woordklok v2: common questions
What microcontroller does the Woordklok v2 use?
The Woordklok v2 is built around the esp32-s3-wroom, from the ESP32 family.
How big is the Woordklok v2 PCB?
The Woordklok v2 measures 27.9 × 12.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Woordklok v2?
4 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Woordklok v2 design files?
From the amybronk/woordklok repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Woordklok v2 design in my own project?
Yes, under the terms of its MIT license, which amybronk chose for the repository.
Can I test firmware for the Woordklok v2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in woordklok
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k