8 open source boards using the ESP32-S3-WROOM
Real designs built with the ESP32-S3-WROOM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ZakladniElektronika
TVavrinec
100 × 100 mm378 parts4LNo license0ESP32
Music system
mkno04
50 × 70 mm109 parts2LNo license0- schematic only · 141 partsESP32
MP3-Gotchi v2
Artisfera
141 partsAGPL-3.00 ESP32
Woordklok v2
amybronk
27.9 × 12.5 mm4 parts2LMIT2ESP32
Vm129-cpu
mirdej
53.1 × 113.2 mm95 parts4LNo license23ESP32
DIAMOND
GemsErasmusPlus
90 × 40 mm46 parts2LCC-BY-SA-4.03ESP32
HlavniDeska
TVavrinec
100 × 70.2 mm123 parts4LNo license0ESP32
SAPPHIRE
GemsErasmusPlus
90 × 40 mm36 parts2LCC-BY-SA-4.03
How designs wire the ESP32-S3-WROOM
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ESP32-S3-WROOM connects to, and the resistors, capacitors and other passives placed on it.
- The 3V3 pin is tied to 3.3V on 5 of 5 designs.
- The EN pin has a capacitor to GND on 4 of 5 designs, most often 1 µF (then 100 nF).
- The EN pin has a pull-up to 3.3V on 4 of 5 designs, most often 10 kΩ (then 100 kΩ).
- The IO8 pin has a series resistor on 4 of 5 designs, most often 10 kΩ (then 100 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 40, 41 | Connected to: GND 100% | — |
| 3V3pin 2 | Connected to: 3.3V 100% | — |
| ENpin 3 | Connected to: A connector 60% · not connected 20% |
|
| IO4pin 4 | Connected to: A connector 40% · not connected 40% |
|
| IO5pin 5 | Connected to: A connector 40% · not connected 40% |
|
| IO6pin 6 | Connected to: Signal 60% · not connected 40% |
|
| IO7pin 7 | Connected to: Signal 80% · not connected 20% |
|
| IO8pin 12 | Connected to: Signal 80% · not connected 20% |
|
| IO46pin 16 | Connected to: Not connected 80% · a signal 20% | — |
| IO9pin 17 | Connected to: Signal 60% · not connected 40% |
|
| IO12pin 20 | Connected to: A connector 60% · not connected 20% |
|
| IO13pin 21 | Connected to: A connector 80% · not connected 20% |
|
| IO21pin 23 | Connected to: Not connected 60% · a signal 40% | — |
| IO47pin 24 | Connected to: Not connected 60% · a signal 40% | — |
| IO48pin 25 | Connected to: Not connected 60% · a signal 40% | — |
| IO45pin 26 | Connected to: Not connected 80% · a signal 20% | — |
| IO0pin 27 | Connected to: A connector 60% · not connected 20% |
|
| IO35pin 28 | Connected to: Not connected 60% · a signal 40% | — |
| IO36pin 29 | Connected to: Not connected 60% · a signal 40% | — |
| IO37pin 30 | Connected to: Not connected 60% · a signal 40% | — |
| IO38pin 31 | Connected to: Not connected 60% · a signal 40% |
|
| IO39pin 32 | Connected to: Signal 60% · not connected 40% |
|
| RXD0pin 36 | Connected to: Not connected 60% · a signal 40% | — |
| TXD0pin 37 | Connected to: Not connected 60% · a signal 40% | — |
15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Vm129-cpu by mirdej, DIAMOND by GemsErasmusPlus, Woordklok v2 by amybronk and Music system by mkno04.
The ESP32-S3-WROOM in open source designs
The gallery holds 8 open source boards using the ESP32-S3-WROOM from 6 GitHub repositories; a typical one measures about 90 × 70 mm and carries around 102 components.
57% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Vm129-cpu by mirdej.
Parts used alongside the ESP32-S3-WROOM
Microcontrollers on boards using the ESP32-S3-WROOM
What boards using the ESP32-S3-WROOM are built for
ESP32-S3-WROOM: common questions
Where can I find a ESP32-S3-WROOM reference design?
Each of the 8 boards on this page is a real design using the ESP32-S3-WROOM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-S3-WROOM 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-S3-WROOM.
How is the ESP32-S3-WROOM EN pin connected?
The EN pin has a capacitor to GND on 4 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the ESP32-S3-WROOM.
What resistor goes on the ESP32-S3-WROOM IO8 pin?
The IO8 pin has a series resistor on 4 of 5 designs, most often 10 kΩ (then 100 Ω). Counted from the KiCad layouts of 5 open source designs using the ESP32-S3-WROOM.
Which microcontrollers do boards using the ESP32-S3-WROOM use?
Most are built on ESP32 (8).
How big is a typical board using the ESP32-S3-WROOM?
The median is 90 × 70 mm, and 57% are two-layer designs.
What is the most popular open source board using the ESP32-S3-WROOM?
By GitHub stars, Vm129-cpu by mirdej, with 23 stars.
Can I simulate one of these boards using the ESP32-S3-WROOM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.