3D-Scanner
anadskman·3D-Scanner·PCB/3DScanner.kicad_pcb
About the 3D-Scanner PCB
3D-Scanner is an open source PCB design by anadskman, published on GitHub. It is a 2-layer board measuring 131.4 × 63.5 mm, with 28 components from 21 distinct parts.
Other key parts include the 74AHCT125. By type, the board carries 14 connectors, 6 resistors, 5 capacitors, 1 IC, 1 fuse and 1 diode.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
A custom-designed portable 3D scanner built from scratch in Fusion 360 and KiCad. The scanner uses a motorised arch and rotating turntable to capture objects from different angles and create 3D models.
A custom-designed portable 3D scanner built from scratch in Fusion 360 and KiCad. The scanner uses a motorised arch and rotating turntable to capture objects from different angles and create 3D models.
The design uses an ESP32, two NEMA 17 stepper motors, DRV8825 drivers and a 1080p USB camera.
- Rotating turntable to move the object - Motorised arch to move the camera around the object
Main components on the 3D-Scanner
3D-Scanner bill of materials (BOM)
28 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74AHCT125 | DIP-14_W7.62mm | U2 |
| 1 | 12V DC input | BarrelJack_Horizontal | J1 |
| 1 | Turntable Logic | PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | Arch Logic | PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | Turntable Motor/Power | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | Arch Motor/Power | PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | limit switch Turntable | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | limit switch Arch 1 | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | limit switch Arch 2 | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | 12 V-to-5 V buck | FanPinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | Turntable Motor Output | TerminalBlock_Xinya_XY308-2.54-4P_1x04_P2.54mm_Horizontal | J10 |
| 1 | esp left | PinSocket_1x15_P2.54mm_Vertical | J11 |
| 1 | Arch Motor Output | TerminalBlock_Xinya_XY308-2.54-4P_1x04_P2.54mm_Horizontal | J12 |
| 1 | esp right | PinSocket_1x15_P2.54mm_Vertical | J13 |
| 1 | WS2812 LED | PinHeader_1x03_P2.54mm_Vertical | J14 |
| 1 | Input Fuse | Fuseholder_Clip-5x20mm_Bel_FC-203-22_Lateral_P17.80x5.00mm_D1.17mm_Horizontal | F1 |
| 1 | Reverse-polarity protection | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 2 | 100uf | CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 3 | 100nf | CP_Radial_D10.0mm_P5.00mm | C3, C4, C5 |
| 5 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
3D-Scanner design files
The KiCad project lives in the anadskman/3D-Scanner repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/3DScanner.kicad_pcb
- SchematicPCB/3DScanner.kicad_sch
3D-Scanner: common questions
How big is the 3D-Scanner PCB?
The 3D-Scanner measures 131.4 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 3D-Scanner?
28 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the 3D-Scanner design files?
From the anadskman/3D-Scanner repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 3D-Scanner design in my own project?
The repository has no license, so all rights stay with anadskman. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k