Neopixel star hotplate v2

andreban·neopixel-star·hotplate/v2/kicad/neopixel-star-hotplate-v2.kicad_pcb

Neopixel star hotplate v2 PCB layout, top view — open source board by andreban

About the Neopixel star hotplate v2 PCB

Neopixel star hotplate v2 is an open source PCB design by andreban, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 51 × 51 mm, with 12 components from 4 distinct parts.

By type, the board carries 9 LEDs, 1 connector, 1 capacitor and 1 resistor.

It belongs with the displays & leds designs in this gallery, and the repository also holds 1 earlier revision of it.

From the project

An SMD version for home assembly: every part that needs solder paste is on the front, so the front reflows in one pass on a hot plate. Only the JST connector is on the back, soldered afterwards with an iron. 50 mm, 3535 LEDs. For the shared wiring, power and code notes, see the m

An SMD version for home assembly: every part that needs solder paste is on the front, so the front reflows in one pass on a hot plate. Only the JST connector is on the back, soldered afterwards with an iron. 50 mm, 3535 LEDs. For the shared wiring, power and code notes, see the main README.

Assembly drawing, front and back, for printing: docs/assembly.pdf

- LEDs: 9 × Worldsemi WS2812B-MINI-V6 (3535). Same pinout, footprint and protocol as the WS2812B-MINI-V3/W in v1, positioned 17 mm and 13 mm from the centre. - No level shifter (U1, C2 and R2 dropped): the V6 datasheet lowers the data…

Neopixel star hotplate v2, from the project README
From the project README

Neopixel star hotplate v2 bill of materials (BOM)

12 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
S3B-PH-SM4-TB(LF)(SN)
JST-PH 3p
JST
J1
9
WS2812B-MINI-V6
WS2812B-Mini
Worldsemi
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +1
1
CL10A106KP8NNNC
10u
Samsung
C1
1
0603WAF3300T5E
330
UNI-ROYAL
R1

Neopixel star hotplate v2 design files

The KiCad project lives in the andreban/neopixel-star repository on GitHub; these links point at the commit this page was built from.

Neopixel star hotplate v2: common questions

How big is the Neopixel star hotplate v2 PCB?

The Neopixel star hotplate v2 measures 51 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Neopixel star hotplate v2?

12 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Neopixel star hotplate v2 design files?

From the andreban/neopixel-star repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Neopixel star hotplate v2 design in my own project?

Yes, under the terms of its Apache-2.0 license, which andreban chose for the repository.

More boards in neopixel-star

Earlier revisions in the repo: neopixel-star-hotplate

Similar boards