Neopixel star

andreban·neopixel-star·smd/kicad/neopixel-star.kicad_pcb

Neopixel star PCB layout, top view — open source board by andreban

About the Neopixel star PCB

Neopixel star is an open source PCB design by andreban, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 51 × 51 mm, with 24 components from 7 distinct parts.

Other key parts include the SN74AHCT1G125DBVR. By type, the board carries 11 capacitors, 9 LEDs, 2 resistors, 1 IC and 1 connector.

It belongs with the displays & leds designs in this gallery.

From the project

The fab-assembled version: 50 mm, 5050 LEDs, parts on both sides. For the shared wiring, power and code notes, see the main README.

The fab-assembled version: 50 mm, 5050 LEDs, parts on both sides. For the shared wiring, power and code notes, see the main README.

Assembly drawing, front and back, for printing: docs/assembly.pdf

- 9 × WS2812B (5050): one in the centre, one in each of the 8 points - 100 nF decoupling cap per LED, 10 µF bulk cap - On-board 74AHCT1G125 level shifter, so 3.3 V microcontrollers (Pico, ESP32, …) drive it reliably - JST-PH 2.0 mm 3-pin SMD connector on the back, cable exits toward the top point - Front: LEDs, their caps and the 330 Ω data resistor, no silkscreen. Back: connector, level shifter…

Neopixel star, from the project README
From the project README

Main components on the Neopixel star

Neopixel star bill of materials (BOM)

24 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SN74AHCT1G125DBVR
74AHCT1G125
Texas Instruments
U1
1
S3B-PH-SM4-TB(LF)(SN)
JST-PH 3p
JST
J1
9
WS2812B-B/T
WS2812B
Worldsemi
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +1
10
CL05B104KO5NNNC
100n
Samsung
C1, C2, C3, C4, C5, C6, C7, C8 +2
1
CL21A106KAYNNNC
10u
Samsung
C10
1
0402WGF3300TCE
330
UNI-ROYAL
R1
1
0402WGF1003TCE
100k
UNI-ROYAL
R2

Neopixel star design files

The KiCad project lives in the andreban/neopixel-star repository on GitHub; these links point at the commit this page was built from.

Neopixel star: common questions

How big is the Neopixel star PCB?

The Neopixel star measures 51 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Neopixel star?

24 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Neopixel star design files?

From the andreban/neopixel-star repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Neopixel star design in my own project?

Yes, under the terms of its Apache-2.0 license, which andreban chose for the repository.

More boards in neopixel-star

Similar boards