Neopixel star xiao
andreban·neopixel-star·xiao/kicad/neopixel-star-xiao.kicad_pcb
About the Neopixel star xiao PCB
Neopixel star xiao is an open source RP2040/RP2350 PCB design by andreban, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 61.3 × 61.3 mm, with 12 components from 4 distinct parts.
Its main chip is the 102010550, from the RP2040/RP2350 family. By type, the board carries 9 LEDs, 1 IC, 1 capacitor and 1 resistor.
It belongs with the displays & leds designs in this gallery.
From the project
A self-contained star: a Seeed Studio XIAO on the back runs the LEDs and connects over its own USB-C. No separate microcontroller, no cable to wire up. The front is the hot-plate v2 design (3535 LEDs that take 3.3 V data directly), so it reflows the same way. The XIAO plugs into
A self-contained star: a Seeed Studio XIAO on the back runs the LEDs and connects over its own USB-C. No separate microcontroller, no cable to wire up. The front is the hot-plate v2 design (3535 LEDs that take 3.3 V data directly), so it reflows the same way. The XIAO plugs into two female headers on the back, so it can come out again (to reuse it, or swap in another model). 60 mm.

Main components on the Neopixel star xiao
Neopixel star xiao bill of materials (BOM)
12 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 102010550 XIAO RP2350 Seeed Studio | XIAO_Socket_2x07_P2.54mm_W15.24mm | U1 |
| 9 | WS2812B-MINI-V6 WS2812B-Mini Worldsemi | LED_WS2812B-Mini_PLCC4_3.5x3.5mm | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +1 |
| 1 | CL10A106KP8NNNC 10u Samsung | C_0603_1608Metric | C1 |
| 1 | 0603WAF3300T5E 330 UNI-ROYAL | R_0603_1608Metric | R1 |
Neopixel star xiao design files
The KiCad project lives in the andreban/neopixel-star repository on GitHub; these links point at the commit this page was built from.
Neopixel star xiao: common questions
What microcontroller does the Neopixel star xiao use?
The Neopixel star xiao is built around the 102010550, from the RP2040/RP2350 family.
How big is the Neopixel star xiao PCB?
The Neopixel star xiao measures 61.3 × 61.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Neopixel star xiao?
12 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Neopixel star xiao design files?
From the andreban/neopixel-star repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Neopixel star xiao design in my own project?
Yes, under the terms of its Apache-2.0 license, which andreban chose for the repository.
Can I test firmware for the Neopixel star xiao without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in neopixel-star
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k