Neopixel star tht

andreban·neopixel-star·tht/kicad/neopixel-star-tht.kicad_pcb

Neopixel star tht PCB layout, top view — open source board by andreban

About the Neopixel star tht PCB

Neopixel star tht is an open source PCB design by andreban, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 56.2 × 56.2 mm, with 12 components from 4 distinct parts.

By type, the board carries 9 LEDs, 1 connector, 1 capacitor and 1 resistor.

It belongs with the displays & leds designs in this gallery.

From the project

A hand-solderable version of the NeoPixel Star: the same outline, artwork, wiring and data order, built from through-hole parts. It is 55 mm tip to tip (the SMD board is 50 mm).

A hand-solderable version of the NeoPixel Star: the same outline, artwork, wiring and data order, built from through-hole parts. It is 55 mm tip to tip (the SMD board is 50 mm).

Assembly drawing, front and back, for printing: docs/assembly.pdf

- LEDs: 9 × Worldsemi WS2812D-F5 (5 mm, 4 leads). Their data input threshold is a fixed 2.7 V, so 3.3 V microcontrollers drive them directly. No level shifter, and the LEDs run at a full 5 V. - No per-LED capacitors: the WS2812D-F5 datasheet calls for none. There is one 10 µF bulk capacitor at the input. - Parts on the front, soldered from the back.…

Neopixel star tht, from the project README
From the project README

Neopixel star tht bill of materials (BOM)

12 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
S3B-PH-K-S(LF)(SN)
JST-PH 3p
JST
J1
9
WS2812D-F5
Worldsemi
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +1
1
KM106M025D11RR0VH2FP0
10u
Chengx
C1
1
MF1/4W-330R 1%
330
CCO
R1

Neopixel star tht design files

The KiCad project lives in the andreban/neopixel-star repository on GitHub; these links point at the commit this page was built from.

Neopixel star tht: common questions

How big is the Neopixel star tht PCB?

The Neopixel star tht measures 56.2 × 56.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Neopixel star tht?

12 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Neopixel star tht design files?

From the andreban/neopixel-star repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Neopixel star tht design in my own project?

Yes, under the terms of its Apache-2.0 license, which andreban chose for the repository.

More boards in neopixel-star

Similar boards