Hellen1-motor driver
andreika-git·hellen-one·kicad/modules/hellen1-motor-driver/hellen1-motor-driver.kicad_pcb
About the Hellen1-motor driver PCB
Hellen1-motor driver is an open source PCB design by andreika-git, published on GitHub. It is a 4-layer board measuring 13.8 × 10 mm, with 17 components from 7 distinct parts.
Other key parts include the TLE9201SG. By type, the board carries 13 capacitors, 2 resistors, 1 IC and 1 module.
It belongs with the robotics & motion designs in this gallery.
From the project
Hellen-One Hardware Platform for rusEFI Engine Management System
If you are designing a new ECU frame see https://github.com/andreika-git/hellen-one/tree/master/modules
doThis folder contains module source files, not reusable resulting frames like here.
See https://github.com/andreika-git/hellen-one/wiki/scripts-howto#how-to-create-a-module
The export scripts in bin/ target KiCad 10 (kicad-cli). export.sh runs from a board repository root (reads revision.txt) and writes gerber/: gerbers with zones refilled in-memory, drill, position CSV, netlist + BOM CSV (via hellen-one-kicad-bom-plugin.py), schematic PDF and VRML. The board file itself is not modified.
Main components on the Hellen1-motor driver
Hellen1-motor driver bill of materials (BOM)
17 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLE9201SG | Infineon_PG-DSO-12-11 | U821 |
| 1 | Module-motor-driver-0.1 | motor-driver | M821 |
| 10 | 10u | C0805 | C821, C822, C823, C824, C825, C826, C827, C828 +2 |
| 1 | 100n | C0603 | C831 |
| 2 | 10n | C0603 | C832, C833 |
| 1 | 10k | R0603 | R821 |
| 1 | 4.7k | R0603 | R822 |
Hellen1-motor driver design files
The KiCad project lives in the andreika-git/hellen-one repository on GitHub; these links point at the commit this page was built from.
Hellen1-motor driver: common questions
How big is the Hellen1-motor driver PCB?
The Hellen1-motor driver measures 13.8 × 10 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Hellen1-motor driver?
17 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hellen1-motor driver design files?
From the andreika-git/hellen-one repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hellen1-motor driver design in my own project?
The repository has no license, so all rights stay with andreika-git. Use it as a reference, and ask the author before reusing the design.
More boards in hellen-one
Hellen1-uaefi
andreika-git
100 × 100 mm90 parts4LNo license36STM32
WBO
andreika-git
24.6 × 14 mm63 parts4LNo license36Hellen1-vr discrete
andreika-git
15.2 × 9.8 mm48 parts4LNo license36Hellen1-mcz33810
andreika-git
44.8 × 12.5 mm32 parts4LNo license36Hellen1-vr max9924
andreika-git
15.2 × 9.8 mm13 parts4LNo license36
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979