HardLabs

MCU-Datalogger with-512K-EEPROM-and-Clock

andres-perez0·MCU-Datalogger-with-512K-EEPROM-and-Clock

MCU-Datalogger with-512K-EEPROM-and-Clock PCB layout, top view — open source AVR/Arduino board by andres-perez0

About the MCU-Datalogger with-512K-EEPROM-and-Clock PCB

MCU-Datalogger with-512K-EEPROM-and-Clock is an open source AVR/Arduino PCB design by andres-perez0, published on GitHub. It is a 2-layer board measuring 54.5 × 36.5 mm, with 25 components from 16 distinct parts.

Its main chip is the ATMEGA328P-AU, from the AVR/Arduino family. Other key parts include the 24LC1025 and DS1337S_. By type, the board carries 7 resistors, 5 capacitors, 4 ICs, 4 connectors, 2 crystals and 2 diodes.

From the project

An ATMega328 based microcontroller with 512k EEPROM and clock, ultizing github branches for 2 and 4 layer circuit design

Main components on the MCU-Datalogger with-512K-EEPROM-and-Clock

24LC1025ATMEGA328P-AUDS1337S_

MCU-Datalogger with-512K-EEPROM-and-Clock bill of materials (BOM)

25 components, 16 distinct parts.

QtyPartRefs
2
24LC1025
U1, U2
1
ATMEGA328P-AU
U3
1
DS1337S_
U4
1
32.768 KHz
Y1
1
16 MHz
Y2
2
Conn_01x04_Pin
J1, J2
1
Conn_01x09_Pin
J3
1
Conn_02x03_Odd_Even
J4
1
Battery
BT1
2
LED
D1, D2
2
0.1uF
C1, C4
2
22pF
C2, C3
1
100nF
C5
3
10K
R1, R2, R6
2
4.7K
R3, R4
2
330
R5, R7

MCU-Datalogger with-512K-EEPROM-and-Clock design files

The KiCad project lives in the andres-perez0/MCU-Datalogger-with-512K-EEPROM-and-Clock repository on GitHub; these links point at the commit this page was built from.

MCU-Datalogger with-512K-EEPROM-and-Clock: common questions

What microcontroller does the MCU-Datalogger with-512K-EEPROM-and-Clock use?

The MCU-Datalogger with-512K-EEPROM-and-Clock is built around the ATMEGA328P-AU, from the AVR/Arduino family.

How big is the MCU-Datalogger with-512K-EEPROM-and-Clock PCB?

The MCU-Datalogger with-512K-EEPROM-and-Clock measures 54.5 × 36.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MCU-Datalogger with-512K-EEPROM-and-Clock?

25 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the MCU-Datalogger with-512K-EEPROM-and-Clock design files?

From the andres-perez0/MCU-Datalogger-with-512K-EEPROM-and-Clock repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MCU-Datalogger with-512K-EEPROM-and-Clock design in my own project?

The repository has no license, so all rights stay with andres-perez0. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MCU-Datalogger with-512K-EEPROM-and-Clock without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards