NuTube MUSES AMP PCB v2
Andrew-Takahashi·NuTube_MUSES8920_HEADPHONEAMP·NuTube_MUSES8920_HEADPHONEAMP/NuTube_MUSES_AMP_PCB_v2.kicad_pcb
About the NuTube MUSES AMP PCB v2
NuTube MUSES AMP PCB v2 is an open source PCB design by Andrew-Takahashi, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 54 components from 25 distinct parts.
Other key parts include the OAD1R5, LM7805_TO220, NuTube and OPAMP. By type, the board carries 22 capacitors, 14 resistors, 5 ICs, 4 connectors, 1 switch and 1 diode.
It belongs with the audio designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
さらにオペアンプのバイアス電流をキャンセルするための抵抗用パッドを追加(R7,R11).
さらにオペアンプのバイアス電流をキャンセルするための抵抗用パッドを追加(R7,R11).
電源回りのEMIフィルタをコモンモードチョークコイル + 貫通コンデンサで強化.
名前の通りNuTubeとMUSES8920を使ったヘッドホンアンプ. 現状ではNuTubeの配線を間違えているので修正予定. ついでに両電源化してオペアンプ出力カップリングコンデンサをなくす予定.
参考(前段はパクリ) www.maroon.dti.ne.jp/jyaku9/electronic/electronic5/electronic5-2.html
Main components on the NuTube MUSES AMP PCB v2
NuTube MUSES AMP PCB v2 bill of materials (BOM)
54 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OAD1R5 | OAD1R5-IIOO | U1 |
| 2 | LM7805_TO220 | SOT-89-3_Handsoldering | U2, U3 |
| 1 | NuTube | NuTube_Conversion_Board | U4 |
| 1 | OPAMP | DIP-8_W7.62mm_Socket_LongPads | U5 |
| 1 | Conn_01x02 | 006P_Holder | J1 |
| 1 | Conn_01x02 | microUSB(SupplyOnly) | J2 |
| 2 | Audio-Jack-4 | MJ-4PP-9 | J3, J4 |
| 1 | EMI_Filter_Commonmode | DLW5BTM | FL1 |
| 2 | EMI_Filter_Commonmode | ACM2520-2P | FL2, FL3 |
| 4 | 10k | LTP3296 | RV1, RV2, RV3, RV4 |
| 1 | SW_DIP_x01 | 2MS6-T1-B3-M1-QE | SW1 |
| 1 | D | D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 2 | EMI_Filter_C | NFM21PC | C1, C2 |
| 2 | 0.1u | C_0603_HandSoldering | C3, C4 |
| 6 | 100u | CP_Radial_D6.3mm_P2.50mm | C5, C6, C11, C16, C19, C20 |
| 2 | 100u | CP_Radial_D10.0mm_P5.00mm | C7, C9 |
| 4 | 22u | CP_Radial_D6.3mm_P2.50mm | C8, C10, C13, C14 |
| 4 | 1u | ECHU(X)G3 | C12, C15, C21, C22 |
| 2 | 33u | CP_Radial_D10.0mm_P5.00mm | C17, C18 |
| 2 | 33k | R_0603_HandSoldering | R1, R3 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 150 | R_0603_HandSoldering | R2, R4 |
| 2 | 120k | R_0603_HandSoldering | R5, R6 |
| 2 | 1M | R_0603_HandSoldering | R7, R11 |
| 4 | 1k | R_0603_HandSoldering | R8, R9, R12, R13 |
| 2 | 75 | R_0603_HandSoldering | R10, R14 |
NuTube MUSES AMP PCB v2 design files
The KiCad project lives in the Andrew-Takahashi/NuTube_MUSES8920_HEADPHONEAMP repository on GitHub; these links point at the commit this page was built from.
NuTube MUSES AMP PCB v2: common questions
How big is the NuTube MUSES AMP PCB v2?
The NuTube MUSES AMP PCB v2 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NuTube MUSES AMP PCB v2?
54 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the NuTube MUSES AMP PCB v2 design files?
From the Andrew-Takahashi/NuTube_MUSES8920_HEADPHONEAMP repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the NuTube MUSES AMP PCB v2 design in my own project?
The repository has no license, so all rights stay with Andrew-Takahashi. Use it as a reference, and ask the author before reusing the design.
More boards in NuTube_MUSES8920_HEADPHONEAMP
Earlier revisions in the repo: NuTube_MUSES_AMP_PCB
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687