HardLabs

Lab64 vday

angelinakrinos·lab64_vday

Lab64 vday PCB layout, top view — open source ESP32 board by angelinakrinos

About the Lab64 vday PCB

Lab64 vday is an open source ESP32 PCB design by angelinakrinos, published on GitHub. It is a 2-layer board measuring 145.3 × 70 mm, with 8 components from 8 distinct parts.

Its main chip is the XIAO-ESP32-S6-SMD, from the ESP32 family. Other key parts include the DFR0299. By type, the board carries 2 ICs, 2 connectors, 2 resistors, 1 module and 1 battery holder.

From the project

2. RFID Module - Solder longer header pins into your RFID module for better connection.

2. RFID Module - Solder longer header pins into your RFID module for better connection.

3. Soldering Components Onto the Board - Terminal blocks should face outward so wires can be easily inserted. - The battery holder has clearly marked positive and negative terminals—pay attention to snap-in orientation. - RFID module should be soldered as high as possible for better range.

Main components on the Lab64 vday

XIAO-ESP32-S6-SMDDFR0299

Lab64 vday bill of materials (BOM)

8 components, 8 distinct parts.

QtyPartRefs
1
XIAO-ESP32-S6-SMD
U1-microcontroller1
1
DFR0299
U2-mp3player1
1
RFID-RC522
M1-RFID1
1
Screw_Terminal_01x02
J1-speaker1
1
Screw_Terminal_01x08
J2-controls1
1
1043
BT1
1
470
R1
1
1K
R2

Lab64 vday design files

The KiCad project lives in the angelinakrinos/lab64_vday repository on GitHub; these links point at the commit this page was built from.

Lab64 vday: common questions

What microcontroller does the Lab64 vday use?

The Lab64 vday is built around the XIAO-ESP32-S6-SMD, from the ESP32 family.

How big is the Lab64 vday PCB?

The Lab64 vday measures 145.3 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Lab64 vday?

8 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Lab64 vday design files?

From the angelinakrinos/lab64_vday repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Lab64 vday design in my own project?

The repository has no license, so all rights stay with angelinakrinos. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Lab64 vday without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards