20 open source boards using the DFR0299

Real designs built with the DFR0299, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

20 boardsClear filters|Most starred

How designs wire the DFR0299

Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the DFR0299 connects to, and the resistors, capacitors and other passives placed on it.

  • The ADKEY1 pin is left unconnected on 18 of 18 designs.
  • The ADKEY2 pin is left unconnected on 18 of 18 designs.
  • The USB+ pin is left unconnected on 18 of 18 designs.
  • The USB- pin is left unconnected on 18 of 18 designs.
VCCpin 1Connected to: 5V 83% · a signal 17%
RXpin 2Connected to: The microcontroller 44%
  • Series resistor on 50% · 1 kΩ (8)
DAC_Rpin 4Connected to: Not connected 67% · a signal 33%
DAC_Lpin 5Connected to: Not connected 67% · a signal 33%
GNDpin 7, 10Connected to: GND 94%
IO1pin 9Connected to: Not connected 94%
IO2pin 11Connected to: Not connected 89%
ADKEY1pin 12Connected to: Not connected 100%
ADKEY2pin 13Connected to: Not connected 100%
USB+pin 14Connected to: Not connected 100%
USB-pin 15Connected to: Not connected 100%
BUSYpin 16Connected to: Not connected 78% · a signal 22%

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sampler by ijnekenamay, Lab64 vday by angelinakrinos, Gifu Creation Koubou Teaching Material by kinoshita-lab and ModularPowerSupply by Animal-Crate.

The DFR0299 in open source designs

The gallery holds 20 open source boards using the DFR0299 from 18 GitHub repositories; a typical one measures about 89 × 88.3 mm and carries around 31 components.

90% are two-layer designs, the rest use four layers or more, and 35% carry an open source license.

The most starred is Sampler by ijnekenamay.

Parts used alongside the DFR0299

Microcontrollers on boards using the DFR0299

DFR0299: common questions

Where can I find a DFR0299 reference design?

Each of the 20 boards on this page is a real design using the DFR0299. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the DFR0299 ADKEY1 pin connected?

The ADKEY1 pin is left unconnected on 18 of 18 designs. Counted from the KiCad layouts of 18 open source designs using the DFR0299.

How is the DFR0299 ADKEY2 pin connected?

The ADKEY2 pin is left unconnected on 18 of 18 designs. Counted from the KiCad layouts of 18 open source designs using the DFR0299.

How is the DFR0299 USB+ pin connected?

The USB+ pin is left unconnected on 18 of 18 designs. Counted from the KiCad layouts of 18 open source designs using the DFR0299.

Which microcontrollers do boards using the DFR0299 use?

Most are built on ESP32 (10), AVR/Arduino (5), ESP8266 (1) and RP2040/RP2350 (1).

How big is a typical board using the DFR0299?

The median is 89 × 88.3 mm, and 90% are two-layer designs.

What is the most popular open source board using the DFR0299?

By GitHub stars, Sampler by ijnekenamay, with 143 stars.

Can I simulate one of these boards using the DFR0299 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part