ESP32
Animal-Crate·Animal-Crate·Building Resources/KiCad PCB Files/ESP32_PCB/ESP32PCB.kicad_pcb
About the ESP32 PCB
ESP32 is an open source ESP32 PCB design by Animal-Crate, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 54.2 × 51.3 mm, with 4 components from 4 distinct parts.
Its main chip is the ESP32-DEVKITC-32D, from the ESP32 family. By type, the board carries 2 connectors, 1 IC and 1 resistor.
From the project
This is a public repository for the Animal Crate project. Please review the README for more information.
The files in this directory are component files for the PCB boards used in this project, created in the KiCad Software.
Main components on the ESP32
ESP32 bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DEVKITC-32D | MODULE_ESP32-DEVKITC-32D | U1 |
| 1 | Conn_01x12_Socket | PinSocket_1x12_P2.54mm_Vertical | J1 |
| 1 | Conn_01x14_Socket | PinSocket_1x14_P2.54mm_Vertical | J2 |
| 1 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
ESP32 design files
The KiCad project lives in the Animal-Crate/Animal-Crate repository on GitHub; these links point at the commit this page was built from.
ESP32: common questions
What microcontroller does the ESP32 use?
The ESP32 is built around the ESP32-DEVKITC-32D, from the ESP32 family.
How big is the ESP32 PCB?
The ESP32 measures 54.2 × 51.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32 design files?
From the Animal-Crate/Animal-Crate repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32 design in my own project?
Yes, under the terms of its AGPL-3.0 license, which Animal-Crate chose for the repository.
Can I test firmware for the ESP32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Animal-Crate
Similar boards
ESP32
Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k