61 open source boards using the ESP32-DEVKITC-32D
Real designs built with the ESP32-DEVKITC-32D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Esp32-can iot
NewTec-GmbH
87.5 × 70 mm63 parts2LBSD-3-Clause50ESP32
Esp32-hvcc
sinneb
150.5 × 127 mm74 parts2LNo license28ESP32
Esp32PrinterController
MitchBradley
157.5 × 97.8 mm70 parts2LMIT16ESP32
OpenDTU BreakoutBoard
marove2000
35 × 55 mm12 parts2LCC-BY-SA-4.016ESP32
Developer badge-2018
IBM-Developer-Korea
68.6 × 129.5 mm32 parts2LApache-2.010ESP32
ESP32Focuser hardware
simonachmueller
85.5 × 77.5 mm11 parts2LGPL-3.010ESP32
Micromouse
Ojasp21
88 × 114.3 mm61 parts2LNo license8ESP32
G board
2technology
55.4 × 82 mm41 partsGPL-3.05ESP32
Kits
Poluino
90.2 × 53.3 mm15 parts2LTAPR-OHL-1.04ESP32
Gifu Creation Koubou Teaching Material
kinoshita-lab
210 × 140 mm109 parts2LMIT3ESP32
E28-cluster
dowster
130.8 × 139.7 mm74 parts2LNo license3ESP32
Starkit
Mikuel210
65 × 112.5 mm25 parts2LNo license3ESP32
Eja intelligent buoy a electronics
leonardoward
54.9 × 141.7 mm11 parts2LApache-2.03ESP32
OpenSpritzer-V2
MaximeZimmermann
200 × 100 mm75 parts2LGPL-3.02ESP32
Electeam-Sharky
david8128
210 × 125 mm73 parts2LGPL-3.02ESP32
Spikeling V2.2c
MaxZimmer
120 × 80 mm43 parts2LGPL-3.02ESP32
ModularPowerSupply
Animal-Crate
9 × 25 mm35 parts2LAGPL-3.02ESP32
MAZEBLAZE-V3
SurajSonawane2415
111.4 × 88.4 mm22 parts2LNo license2ESP32
KiCad RTM Adapterboard v3 0
PeterDirnhofer
100 × 100 mm68 parts2LNo license1ESP32
KiCad RTM Adapterboard v2 2
PeterDirnhofer
100 × 100 mm56 parts2LNo license1ESP32
Vibraphone controller
jvanvalkenburgh
25.4 × 238 mm33 parts2LNo license1ESP32
Cody
Mikuel210
125 × 99.9 mm30 parts2LNo license1ESP32
SYSMATT-WS2812-MATRIX-CARRIER
sysmatt
162 × 162 mm28 parts2LGPL-3.01ESP32
Eja onboard gateway electronics
leonardoward
134.1 × 62.5 mm21 parts2LApache-2.01ESP32
WRO FE 2026 FoxRobotics
Nakashima26
87.2 × 93.9 mm20 parts2LMIT1ESP32
ERS
t-robop
63.5 × 69.9 mm15 parts2LNo license1- schematic only · 20 partsESP32
MCMC-Bayesian-Learning-Strategies
maorkn
20 partsNo license1 ESP32
Le2-avionics
calstar
375.9 × 152.4 mm125 parts4LNo license0ESP32
Projekt SOC
KrivkaJ
100 × 100 mm119 parts4LNo license0ESP32
ECE445L Lab7Restart
Andres-Wearden
150 × 90 mm83 parts2LNo license0ESP32
DIYBMS ESP32 Controller
orgTestCodacy11KRepos110MB
122.5 × 87.6 mm78 parts2LCC-BY-NC-4.00ESP32
DIYBMS ESP32 Controller
chipsi
122.5 × 87.6 mm77 parts2LCC-BY-NC-4.00ESP32
DIYBMS ESP32 Controller
Arkariusz
122.5 × 87.6 mm75 parts2LCC-BY-NC-4.00ESP32
Integrated board
Open-2-Photon-Microscope
98.5 × 111 mm65 parts2LCERN-OHL-1.20ESP32
Esp32 grbl
ibamsey
135.9 × 83.8 mm49 parts2LNo license0ESP32
8 switches rf
TR-JAYAVARDHAN-SINGH
180.4 × 147.9 mm47 parts2LNo license0
How designs wire the ESP32-DEVKITC-32D
Read from the KiCad layouts of 50 open source designs, one per repository: what each pin of the ESP32-DEVKITC-32D connects to, and the resistors, capacitors and other passives placed on it.
- The CMD pins is left unconnected on 44 of 50 designs (a signal on 6).
- The SD2 pins is left unconnected on 43 of 50 designs (a signal on 7).
- The SD3 pins is left unconnected on 43 of 50 designs (a signal on 7).
- The SD0 pins is left unconnected on 43 of 48 designs (a signal on 5).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3pin 1, J2-1 | Connected to: 3.3V 66% · not connected 24% | — |
| ENpin 2, J2-2 | Connected to: Not connected 72% · a signal 26% | — |
| GND1pin 14, J2-14 | Connected to: GND 84% | — |
| SD2pin 16, J2-16 | Connected to: Not connected 86% | — |
| SD3pin 17, J2-17 | Connected to: Not connected 86% | — |
| CMDpin 18, J2-18 | Connected to: Not connected 88% | — |
| GND3pin 20, J3-1 | Connected to: GND 80% | — |
| TXD0pin 23, J3-4 | Connected to: Not connected 78% · a signal 22% | — |
| RXD0pin 24, J3-5 | Connected to: Not connected 78% · a signal 22% | — |
| GND2pin 26, J3-7 | Connected to: GND 68% · not connected 22% | — |
| SD1pin 36, J3-17 | Connected to: Not connected 88% | — |
| SD0pin 37, J3-18 | Connected to: Not connected 90% | — |
| CLKpin 38, J3-19 | Connected to: Not connected 85% | — |
25 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DIYBMS ESP32 Controller by stuartpittaway, Esp32-can iot by NewTec-GmbH, Esp32-hvcc by sinneb and OpenDTU BreakoutBoard by marove2000.
The ESP32-DEVKITC-32D in open source designs
The gallery holds 61 open source boards using the ESP32-DEVKITC-32D from 54 GitHub repositories; a typical one measures about 100 × 88.4 mm and carries around 31 components.
97% are two-layer designs, the rest use four layers or more, and 41% carry an open source license.
The most starred is DIYBMS ESP32 Controller by stuartpittaway.
Parts used alongside the ESP32-DEVKITC-32D
Microcontrollers on boards using the ESP32-DEVKITC-32D
What boards using the ESP32-DEVKITC-32D are built for
ESP32-DEVKITC-32D: common questions
Where can I find a ESP32-DEVKITC-32D reference design?
Each of the 61 boards on this page is a real design using the ESP32-DEVKITC-32D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-DEVKITC-32D CMD pin connected?
The CMD pins is left unconnected on 44 of 50 designs (a signal on 6). Counted from the KiCad layouts of 50 open source designs using the ESP32-DEVKITC-32D.
How is the ESP32-DEVKITC-32D SD2 pin connected?
The SD2 pins is left unconnected on 43 of 50 designs (a signal on 7). Counted from the KiCad layouts of 50 open source designs using the ESP32-DEVKITC-32D.
How is the ESP32-DEVKITC-32D SD3 pin connected?
The SD3 pins is left unconnected on 43 of 50 designs (a signal on 7). Counted from the KiCad layouts of 50 open source designs using the ESP32-DEVKITC-32D.
What parts are used alongside the ESP32-DEVKITC-32D?
The AMS1117-3.3, L7805, SN65HVD75DR, EL3H7(B)(TA)-G and TCA6416APWR appear in the most repositories here.
Which microcontrollers do boards using the ESP32-DEVKITC-32D use?
Most are built on ESP32 (61).
How big is a typical board using the ESP32-DEVKITC-32D?
The median is 100 × 88.4 mm, and 97% are two-layer designs.
What is the most popular open source board using the ESP32-DEVKITC-32D?
By GitHub stars, DIYBMS ESP32 Controller by stuartpittaway, with 1,143 stars.
Can I simulate one of these boards using the ESP32-DEVKITC-32D before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.