Midi-Keyboard
anshvirmani31-bit·Midi-Keyboard
About the Midi-Keyboard PCB
Midi-Keyboard is an open source ESP32 PCB design by anshvirmani31-bit, published on GitHub. It is a 2-layer board measuring 99.9 × 75.7 mm, with 8 components from 5 distinct parts.
Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 3 switches, 3 diodes, 1 IC and 1 connector.
It belongs with the keyboards and audio designs in this gallery.
From the project
This is my week three project for half-life. The design and parts are different from the tutorial and I also made my own footprint for the capacitive touch pads.
As the name suggests, this is a midi keyboard. It essentially sends data to a computer which then transforms those signals into music. This can be used to create melodies when you don't have instruments on hand. It's also very convenient and easy to carry around since the PCB itself is less than 100x100mm. Another reason you may want to make this is because (I'm assuming) it's also fun to just play around with and see what kind of music you can make!
Main components on the Midi-Keyboard
Midi-Keyboard bill of materials (BOM)
8 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Waveshare ESP32-S3-ZERO | Waveshare ESP32-S3-Zero | U1 |
| 1 | Conn_01x09 | Capacitive Keys | J1 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW3 |
| 3 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3 |
Midi-Keyboard design files
The KiCad project lives in the anshvirmani31-bit/Midi-Keyboard repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB.kicad_pcb
- BOMBOM.csv
Midi-Keyboard: common questions
What microcontroller does the Midi-Keyboard use?
The Midi-Keyboard is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.
How big is the Midi-Keyboard PCB?
The Midi-Keyboard measures 99.9 × 75.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Midi-Keyboard?
8 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Midi-Keyboard design files?
From the anshvirmani31-bit/Midi-Keyboard repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Midi-Keyboard design in my own project?
The repository has no license, so all rights stay with anshvirmani31-bit. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Midi-Keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k