33 open source boards using the Waveshare ESP32-S3-ZERO

Real designs built with the Waveshare ESP32-S3-ZERO, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

33 boardsClear filters|Most starred

How designs wire the Waveshare ESP32-S3-ZERO

Read from the KiCad layouts of 31 open source designs, one per repository: what each pin of the Waveshare ESP32-S3-ZERO connects to, and the resistors, capacitors and other passives placed on it.

  • The 3V3(OUT)_3V3 pin is tied to 3.3V on 30 of 31 designs.
  • The 5V_5V pin is tied to 5V on 29 of 31 designs (not connected on 2).
3V3(OUT)_3V3pin 3V3Connected to: 3.3V 97%
5V_5Vpin 5VConnected to: 5V 94%
GND_GNDpin GNDConnected to: GND 97%

15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MIDI-Keypad by KaiPereira, MusicNote by ViratS-best, Meidi by adicoding-js and Midi-Keyboard by anshvirmani31-bit.

The Waveshare ESP32-S3-ZERO in open source designs

The gallery holds 33 open source boards using the Waveshare ESP32-S3-ZERO from 33 GitHub repositories; a typical one measures about 97 × 87.5 mm and carries around 10 components.

100% are two-layer designs, the rest use four layers or more, and 12% carry an open source license.

The most starred is MusicNote by ViratS-best.

Microcontrollers on boards using the Waveshare ESP32-S3-ZERO

Waveshare ESP32-S3-ZERO: common questions

Where can I find a Waveshare ESP32-S3-ZERO reference design?

Each of the 33 boards on this page is a real design using the Waveshare ESP32-S3-ZERO. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the Waveshare ESP32-S3-ZERO 3V3(OUT)_3V3 pin connected?

The 3V3(OUT)_3V3 pin is tied to 3.3V on 30 of 31 designs. Counted from the KiCad layouts of 31 open source designs using the Waveshare ESP32-S3-ZERO.

How is the Waveshare ESP32-S3-ZERO 5V_5V pin connected?

The 5V_5V pin is tied to 5V on 29 of 31 designs (not connected on 2). Counted from the KiCad layouts of 31 open source designs using the Waveshare ESP32-S3-ZERO.

Which microcontrollers do boards using the Waveshare ESP32-S3-ZERO use?

Most are built on ESP32 (33).

How big is a typical board using the Waveshare ESP32-S3-ZERO?

The median is 97 × 87.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the Waveshare ESP32-S3-ZERO?

By GitHub stars, MusicNote by ViratS-best, with 1 stars.

Can I simulate one of these boards using the Waveshare ESP32-S3-ZERO before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part