TFT-Screen
anshvirmani31-bit·TFT-Screen
About the TFT-Screen PCB
TFT-Screen is an open source RP2040/RP2350 PCB design by anshvirmani31-bit, published on GitHub. It is a 2-layer board measuring 48.3 × 75.5 mm, with 6 components from 5 distinct parts.
Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 2 capacitors, 1 module, 1 transistor, 1 connector and 1 switch.
It belongs with the displays & leds designs in this gallery.
From the project
This is my project for half life week 4. I'm designing a TFT screen that can display simple numbers and be controlled with a rotary encoder. It uses a raspberry pi pico as the micro controller.
This is a simple TFT screen that uses a CANADUINO® ST7789 TFT IPS 1.3-inch display. The interface is controlled using a rotary encoder and it uses raspberry pi pico as the brain. The pcb is designed using KiCad.
My TFT screen is unique as it's much simpler than what's shown in the tutorial. It doesn't use nearly as many parts and the firmware is also much simpler. My screen also has less pins and I use a raspberry pi pico instead of a XIAO so I had to adapt that in the firmware and schematic accordingly.
Main components on the TFT-Screen
TFT-Screen bill of materials (BOM)
6 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RaspberryPi_Pico | RaspberryPi_Pico_Common_THT | A1 |
| 1 | AO3401A | R_0805_2012Metric | Q1 |
| 1 | Conn_01x07 | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 2 | C_Small | C_0805_2012Metric | C1, C2 |
TFT-Screen design files
The KiCad project lives in the anshvirmani31-bit/TFT-Screen repository on GitHub; these links point at the commit this page was built from.
- LayoutWeek 4 PCB.kicad_pcb
- SchematicWeek 4 PCB.kicad_sch
- BOMBOM.csv
TFT-Screen: common questions
What microcontroller does the TFT-Screen use?
The TFT-Screen is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.
How big is the TFT-Screen PCB?
The TFT-Screen measures 48.3 × 75.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TFT-Screen?
6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TFT-Screen design files?
From the anshvirmani31-bit/TFT-Screen repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TFT-Screen design in my own project?
The repository has no license, so all rights stay with anshvirmani31-bit. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TFT-Screen without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k