Attiny10prog
About the Attiny10prog PCB
Attiny10prog is an open source AVR/Arduino PCB design by antonloof, published on GitHub. It is a 2-layer board measuring 62 × 57 mm, with 42 components from 26 distinct parts.
Its main chip is the ATtiny10-TS, from the AVR/Arduino family. Other key parts include the ATmega32U4-AU and MC34063AD. By type, the board carries 12 capacitors, 10 resistors, 5 transistors, 4 ICs, 3 connectors and 2 relays.
Main components on the Attiny10prog
Attiny10prog bill of materials (BOM)
42 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATtiny10-TS | SOT-23-6_Handsoldering | U1 |
| 1 | ATtiny10-TS | DIP-6_W7.62mm | U2 |
| 1 | ATmega32U4-AU | TQFP-44_10x10mm_P0.8mm | U3 |
| 1 | MC34063AD | DIP-8_W10.16mm | U4 |
| 4 | 2N7002 | SOT-23 | Q1, Q3, Q4, Q5 |
| 1 | BSS84 | SOT-23 | Q2 |
| 1 | 16Mhz | Crystal_SMD_HC49-SD | Y1 |
| 1 | Conn_02x06_Odd_Even | PinHeader_2x06_P2.54mm_Vertical | J1 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | USB_B | USB_B_OST_USB-B1HSxx_Horizontal | J3 |
| 1 | 500ma | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 2 | m4-12h | m4-12h | K1, K2 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | D | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | D | D_3220_8050Metric_Pad2.65x5.15mm_HandSolder | D2 |
| 1 | 33u | L_Toroid_Vertical_L13.0mm_W6.5mm_P5.60mm | L1 |
| 6 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C5, C6, C7, C8, C10 |
| 2 | 22p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3 |
| 1 | 1u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4 |
| 2 | 470u | CP_Radial_D8.0mm_P5.00mm | C9, C12 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 500p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C11 |
| 5 | 10k | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4, R10 |
| 2 | 22 | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R6 |
| 1 | 470m | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R7 |
| 1 | 180 | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8 |
| 1 | 86k | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9 |
Attiny10prog design files
The KiCad project lives in the antonloof/attiny10prog repository on GitHub; these links point at the commit this page was built from.
Attiny10prog: common questions
What microcontroller does the Attiny10prog use?
The Attiny10prog is built around the ATtiny10-TS, from the AVR/Arduino family.
How big is the Attiny10prog PCB?
The Attiny10prog measures 62 × 57 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Attiny10prog?
42 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Attiny10prog design files?
From the antonloof/attiny10prog repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Attiny10prog design in my own project?
The repository has no license, so all rights stay with antonloof. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Attiny10prog without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k