20 open source boards using the MC34063AD
Real designs built with the MC34063AD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Mobo
opulo-inc
51.6 × 89 mm57 parts2LCC-BY-SA-4.0193STM32
Pwm-2420-lus
LibreSolar
90 × 85 mm115 partsCC-BY-SA-4.017STM32
BMW-K1200LT-ABS-Conversion
OstapFerensovych
61.4 × 49 mm63 parts2LMIT7AVR/Arduino
Programmable light
dilshan
52.2 × 79 mm50 parts2LMIT5AVR/Arduino
Nixiedisp
jtsiomb
140 × 76.1 mm224 parts2LGPL-3.03STM32
LED controller
engineering-bay
122 × 87 mm166 parts2LNo license0STM32
SYS StepAtten
schilkp
122 × 84 mm142 parts2LMIT0STM32
NI-watch
kwojcik22
100 × 100 mm105 parts4LNo license0Raspberry Pi
Gas-Flow-Control and-Logging-System
Jed0vcela
150 × 70 mm69 parts2LNo license0RP2040/RP2350
EG8504 RP2040
Talkie181
31.8 × 74.3 mm50 parts2LNo license0AVR/Arduino
Attiny10prog
antonloof
62 × 57 mm42 parts2LNo license0Raspberry Pi
Aki300yenLCD-raspico2w
Droplet-Collective
100 × 52 mm24 parts2LNo license0Raspberry Pi
Aki300yenLCD-raspico2w
fnc765
100 × 52 mm24 parts2LNo license0Buck-Convertor
PrathamKalgutkar
53 × 30 mm12 parts2LNo license0- schematic only · 20 partsSTM32
AESH2026
iamanimeshshukl
20 partsNo license0 ESP32
Pole
Tomoshibi-technology
100 × 70 mm181 parts2LMIT1DD Supply Test 1
Acmex2564
207 × 92.7 mm84 parts2LNo license19STM32
Panel
Tomoshibi-technology
90 × 62 mm118 parts2LMIT1BesteLampe! LED Main Moudule
lenaschimmel
83.8 × 61 mm42 parts2LNo license18AVR/Arduino
Impulsgenerator
apxco
99 × 48.5 mm43 parts2LNo license0
How designs wire the MC34063AD
Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the MC34063AD connects to, and the resistors, capacitors and other passives placed on it.
- The TC pin has a capacitor to GND on 15 of 18 designs, most often 470 pF (then 100 pF).
- The VFB pin has a resistor to GND on 14 of 18 designs, most often 1 kΩ (then 1.2 kΩ).
- The IPK pin has a pull-up to 12V on 14 of 18 designs, most often 470 mΩ (then 330 mΩ).
- The VFB pin has a pull-up to 5V on 12 of 18 designs, most often 39 kΩ (then 3 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SWCpin 1 | Connected to: Signal 94% |
|
| SWEpin 2 | Connected to: Signal 61% · GND 33% |
|
| TCpin 3 | Connected to: Signal 94% |
|
| GNDpin 4 | Connected to: GND 89% | — |
| VFBpin 5 | Connected to: Signal 100% |
|
| VINpin 6 | Connected to: 12V 78% · a signal 17% |
|
| IPKpin 7 | Connected to: Signal 94% |
|
| DCpin 8 | Connected to: Signal 94% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mobo by opulo-inc, DD Supply Test 1 by Acmex2564, BesteLampe! LED Main Moudule by lenaschimmel and Pwm-2420-lus by LibreSolar.
The MC34063AD in open source designs
The gallery holds 20 open source boards using the MC34063AD from 19 GitHub repositories; a typical one measures about 99 × 70 mm and carries around 60 components.
94% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Mobo by opulo-inc.
Parts used alongside the MC34063AD
Microcontrollers on boards using the MC34063AD
What boards using the MC34063AD are built for
MC34063AD: common questions
Where can I find a MC34063AD reference design?
Each of the 20 boards on this page is a real design using the MC34063AD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MC34063AD TC pin connected?
The TC pin has a capacitor to GND on 15 of 18 designs, most often 470 pF (then 100 pF). Counted from the KiCad layouts of 18 open source designs using the MC34063AD.
What resistor goes on the MC34063AD VFB pin?
The VFB pin has a resistor to GND on 14 of 18 designs, most often 1 kΩ (then 1.2 kΩ). Counted from the KiCad layouts of 18 open source designs using the MC34063AD.
What pull-up resistor is used on the MC34063AD IPK pin?
The IPK pin has a pull-up to 12V on 14 of 18 designs, most often 470 mΩ (then 330 mΩ). Counted from the KiCad layouts of 18 open source designs using the MC34063AD.
Which microcontrollers do boards using the MC34063AD use?
Most are built on STM32 (8), AVR/Arduino (4), Raspberry Pi (3) and ESP32 (1).
How big is a typical board using the MC34063AD?
The median is 99 × 70 mm, and 94% are two-layer designs.
What is the most popular open source board using the MC34063AD?
By GitHub stars, Mobo by opulo-inc, with 193 stars.
Can I simulate one of these boards using the MC34063AD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.