2 open source boards using the ATTINY10-TS

Real designs built with the ATTINY10-TS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The ATTINY10-TS in open source designs

The gallery holds 2 open source boards using the ATTINY10-TS from 2 GitHub repositories; a typical one measures about 13.6 × 12.6 mm and carries around 15 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Touchuc by jonnor.

Microcontrollers on boards using the ATTINY10-TS

AVR/Arduino 2

What boards using the ATTINY10-TS are built for

ATTINY10-TS: common questions

Where can I find a ATTINY10-TS reference design?

Each of the 2 boards on this page is a real design using the ATTINY10-TS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ATTINY10-TS use?

Most are built on AVR/Arduino (2).

How big is a typical board using the ATTINY10-TS?

The median is 13.6 × 12.6 mm, and 100% are two-layer designs.

What is the most popular open source board using the ATTINY10-TS?

By GitHub stars, Touchuc by jonnor, with 43 stars.

Can I simulate one of these boards using the ATTINY10-TS before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.