ESP32-Lathe-DRO
Antonowitch·ESP32-Lathe-DRO·hardware/kicad/DRO.kicad_pcb
About the ESP32-Lathe-DRO PCB
ESP32-Lathe-DRO is an open source ESP32 PCB design by Antonowitch, published on GitHub under the MIT license. It is a 2-layer board measuring 130 × 80 mm, with 23 components from 9 distinct parts.
Its main chip is the ESP32_DevKit_V1, from the ESP32 family. Other key parts include the SN74LVC14ADR. By type, the board carries 10 connectors, 8 resistors, 3 ICs and 2 capacitors.
It belongs with the iot & wireless designs in this gallery.
From the project
ESP32 digital readout (DRO) for the lathe: up to 4 axes, hardware pulse counting, web UI on phone/tablet. Firmware, KiCad PCB (JLCPCB-ready), case files and flashing guide.
A digital readout (DRO) for the lathe, built around an ESP32 DevKit V1. It reads up to four linear scales (glass scales or magnetic tape) and shows the positions on any touch device – phone or tablet – through a web page served by the ESP32's own Wi-Fi access point. No app, no internet connection, no display hardware needed.
🎥 Video (German): link follows when the video is published

Main components on the ESP32-Lathe-DRO
ESP32-Lathe-DRO bill of materials (BOM)
23 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SN74LVC14ADR SN74LVC14AD | SOIC-14_3.9x8.7mm_P1.27mm | U1, U2 |
| 1 | ESP32_DevKit_V1 | ESP32_DevKit_V1_30Pin | U3 |
| 4 | B5B-XH-A(LF)(SN) B5B-XH-A | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1, J2, J3, J5 |
| 1 | DC-005-5A-2.0 | BarrelJack_Horizontal | J4 |
| 2 | 282837-3 | TerminalBlock_TE_282837-3_P5.08mm | J6, J7 |
| 2 | 282837-4 | TerminalBlock_TE_282837-4_P5.08mm | J8, J9 |
| 1 | 282837-2 | TerminalBlock_TE_282837-2_P5.08mm | J10 |
| 2 | CC0805KRX7R9BB104 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 8 | 0805W8F1002T5E 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
ESP32-Lathe-DRO design files
The KiCad project lives in the Antonowitch/ESP32-Lathe-DRO repository on GitHub; these links point at the commit this page was built from.
ESP32-Lathe-DRO: common questions
What microcontroller does the ESP32-Lathe-DRO use?
The ESP32-Lathe-DRO is built around the ESP32_DevKit_V1, from the ESP32 family.
How big is the ESP32-Lathe-DRO PCB?
The ESP32-Lathe-DRO measures 130 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-Lathe-DRO?
23 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-Lathe-DRO design files?
From the Antonowitch/ESP32-Lathe-DRO repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32-Lathe-DRO design in my own project?
Yes, under the terms of its MIT license, which Antonowitch chose for the repository.
Can I test firmware for the ESP32-Lathe-DRO without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k