22 open source boards using the LMV331

Real designs built with the LMV331, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

22 boardsClear filters|Most starred

How designs wire the LMV331

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the LMV331 connects to, and the resistors, capacitors and other passives placed on it.

  • The V- pin is tied to GND on 12 of 15 designs (1.2V on 2).
  • The + pin has a series resistor on 9 of 15 designs, most often 10 kΩ (then 1 kΩ).
  • Pin 4 has a pull-up to 3.3V on 9 of 15 designs, most often 10 kΩ (then 3.24 kΩ).
  • The V+ pin has a decoupling capacitor on 8 of 15 designs, most often 100 nF (then 2.2 µF).
+pin 1Connected to: Signal 80%
  • Series resistor on 60% · 10 kΩ (2), 1 kΩ (1), 100 kΩ (1)
  • Resistor to GND on 33% · 10 kΩ (3), 22 kΩ (1), 100 kΩ (1)
V-pin 2Connected to: GND 80%
-pin 3Connected to: Signal 87%
  • Series resistor on 47% · 10 kΩ (3), 100 kΩ (2), 0 Ω (1)
  • Pull-up to 3.3V on 33% · 10 kΩ (2), 8.2 kΩ (1), 3 Ω (1)
Pin 4Connected to: Signal 93%
  • Pull-up to 3.3V on 60% · 10 kΩ (3), 3.24 kΩ (1), 2.7 kΩ (1)
  • Series resistor on 47% · 10 kΩ (2), 510 Ω (2), 100 Ω (2)
V+pin 5Connected to: 3.3V 93%
  • Decoupling capacitor on 53% · 100 nF (7), 2.2 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BusPirate-5-rev10 by DangerousPrototypes, Smoothiev2-prime by Smoothieware, CLAS Combo Breakout by takuhoTech and Alturia pcb by rckTom.

The LMV331 in open source designs

The gallery holds 22 open source boards using the LMV331 from 17 GitHub repositories; a typical one measures about 90.1 × 95.6 mm and carries around 124 components.

67% use four copper layers or more, and 27% carry an open source license.

The most starred is BusPirate-5-rev10 by DangerousPrototypes.

LMV331: common questions

Where can I find a LMV331 reference design?

Each of the 22 boards on this page is a real design using the LMV331. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LMV331 V- pin connected?

The V- pin is tied to GND on 12 of 15 designs (1.2V on 2). Counted from the KiCad layouts of 15 open source designs using the LMV331.

What resistor goes on the LMV331 + pin?

The + pin has a series resistor on 9 of 15 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 15 open source designs using the LMV331.

What pull-up resistor is used on the LMV331 pin 4?

Pin 4 has a pull-up to 3.3V on 9 of 15 designs, most often 10 kΩ (then 3.24 kΩ). Counted from the KiCad layouts of 15 open source designs using the LMV331.

What parts are used alongside the LMV331?

The LMV324, AP2112K-3.3, AP2127, CD4067 and LM2776 appear in the most repositories here.

Which microcontrollers do boards using the LMV331 use?

Most are built on STM32 (7), AVR/Arduino (4), RP2040/RP2350 (3) and ESP32 (2).

How big is a typical board using the LMV331?

The median is 90.1 × 95.6 mm, and 33% are two-layer designs.

What is the most popular open source board using the LMV331?

By GitHub stars, BusPirate-5-rev10 by DangerousPrototypes, with 124 stars.

Can I simulate one of these boards using the LMV331 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part