HalfLifeWeek5-Custom
AnvithPothula·HalfLifeWeek5-Custom·ChessClock/ChessClock.kicad_pcb
About the HalfLifeWeek5-Custom PCB
HalfLifeWeek5-Custom is an open source ESP32 PCB design by AnvithPothula, published on GitHub. It is a 2-layer board measuring 100 × 90 mm, with 18 components from 13 distinct parts.
Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 5 switches, 4 connectors, 4 jumpers, 2 resistors, 1 IC and 1 diode.
It belongs with the iot & wireless designs in this gallery.
From the project
For Week 5 I designed a smart chess clock. It has two OLED screens side by side like a normal chess clock, 5 MX keys, a piezo buzzer, and it runs on 3 AA batteries. After a game, it can connect to Wi-Fi and export the game, with how much time each player had on every move, to a L
For Week 5 I designed a smart chess clock. It has two OLED screens side by side like a normal chess clock, 5 MX keys, a piezo buzzer, and it runs on 3 AA batteries. After a game, it can connect to Wi-Fi and export the game, with how much time each player had on every move, to a Lichess study.
Each player has a big key on their side. When you finish your move, you press your key, which stops your clock and starts your opponent's. The 3 keys in the middle are -, Start and +.

Main components on the HalfLifeWeek5-Custom
HalfLifeWeek5-Custom bill of materials (BOM)
18 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Waveshare ESP32-S3-ZERO | Waveshare ESP32-S3-Zero | U1 |
| 2 | OLED | PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 1 | Battery | SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm | J3 |
| 1 | Piezo | SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm | J4 |
| 4 | 3V3 / pin / GND | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 1 | Left | SW_Cherry_MX_1.00u_PCB | SW1 |
| 1 | Right | SW_Cherry_MX_1.00u_PCB | SW2 |
| 1 | Minus | SW_Cherry_MX_1.00u_PCB | SW3 |
| 1 | Start | SW_Cherry_MX_1.00u_PCB | SW4 |
| 1 | Plus | SW_Cherry_MX_1.00u_PCB | SW5 |
| 1 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 10U 10u | C_0805_2012Metric | C1 |
| 2 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
HalfLifeWeek5-Custom design files
The KiCad project lives in the AnvithPothula/HalfLifeWeek5-Custom repository on GitHub; these links point at the commit this page was built from.
HalfLifeWeek5-Custom: common questions
What microcontroller does the HalfLifeWeek5-Custom use?
The HalfLifeWeek5-Custom is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.
How big is the HalfLifeWeek5-Custom PCB?
The HalfLifeWeek5-Custom measures 100 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HalfLifeWeek5-Custom?
18 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the HalfLifeWeek5-Custom design files?
From the AnvithPothula/HalfLifeWeek5-Custom repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the HalfLifeWeek5-Custom design in my own project?
The repository has no license, so all rights stay with AnvithPothula. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the HalfLifeWeek5-Custom without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k