Tamagotchi
Anycircle11139s·tamagotchi
About the Tamagotchi PCB
Tamagotchi is an open source ESP32 PCB design by Anycircle11139s, published on GitHub. It is a 2-layer board measuring 73.1 × 82.9 mm, with 18 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DM-OLED130-636. By type, the board carries 8 diodes, 6 switches, 2 ICs, 1 battery holder and 1 buzzer.
Main components on the Tamagotchi
Tamagotchi bill of materials (BOM)
18 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C3-DIP-SMD | U1 |
| 1 | DM-OLED130-636 | LCD_OLED_128X64_1.3_I2C | U2 |
| 1 | Battery_Cell | PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 6 | SW_Push | SW_VS-1213-67-160GF | SW1, SW2, SW3, SW4, SW5, SW6 |
| 8 | SK6812MINI-E | SK6812MINI-E_fixed | D1, D2, D3, D4, D5, D6, D7, D8 |
Tamagotchi design files
The KiCad project lives in the Anycircle11139s/tamagotchi repository on GitHub; these links point at the commit this page was built from.
- LayoutTamagotchi.kicad_pcb
- SchematicTamagotchi.kicad_sch
- BOMTamagotchi BOM.csv
Tamagotchi: common questions
What microcontroller does the Tamagotchi use?
The Tamagotchi is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Tamagotchi PCB?
The Tamagotchi measures 73.1 × 82.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tamagotchi?
18 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tamagotchi design files?
From the Anycircle11139s/tamagotchi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tamagotchi design in my own project?
The repository has no license, so all rights stay with Anycircle11139s. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Tamagotchi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k