Turnyknobby
Anycircle11139s·turnyknobby·turning knob PCB/turning knob.kicad_pcb
About the Turnyknobby PCB
Turnyknobby is an open source ESP32 PCB design by Anycircle11139s, published on GitHub. It is a 2-layer board measuring 90.2 × 90.2 mm, with 18 components from 4 distinct parts.
Its main chip is the XIAO-ESP32-S3-DIP, from the ESP32 family. By type, the board carries 8 diodes, 8 resistors, 1 IC and 1 switch.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
I started with the custom PCB, I kind of based the PCB off a blinky board, except it has a microcontroller and no random other stuff, just microcontroller connected to leds with a rotary encoder for the turning. I chose the xiao esp32-s3 ecause of its bluetooth capabilities and a
I started with the custom PCB, I kind of based the PCB off a blinky board, except it has a microcontroller and no random other stuff, just microcontroller connected to leds with a rotary encoder for the turning. I chose the xiao esp32-s3 ecause of its bluetooth capabilities and after finishing my schematic, I started on the PCB. I made circle as the edges of the PCB and put the LEDs in a circle around the edges so they can display how high my volume is. I made sure the rotary encoder was in the exact middle, so when I turn it (there will be a case on top) the case wont look weird. After…
Main components on the Turnyknobby
Turnyknobby bill of materials (BOM)
18 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-S3-DIP | XIAO-ESP32-S3-DIP | U1 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 8 | LED | LED_D3.0mm | D1, D3, D4, D5, D6, D7, D8, D9 |
| 8 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R4, R5, R6, R7, R8, R10 |
Turnyknobby design files
The KiCad project lives in the Anycircle11139s/turnyknobby repository on GitHub; these links point at the commit this page was built from.
Turnyknobby: common questions
What microcontroller does the Turnyknobby use?
The Turnyknobby is built around the XIAO-ESP32-S3-DIP, from the ESP32 family.
How big is the Turnyknobby PCB?
The Turnyknobby measures 90.2 × 90.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Turnyknobby?
18 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Turnyknobby design files?
From the Anycircle11139s/turnyknobby repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Turnyknobby design in my own project?
The repository has no license, so all rights stay with Anycircle11139s. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Turnyknobby without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k