Icm-42688-breakout
About the Icm-42688-breakout
Icm-42688-breakout is an open source PCB design by anyshake, published on GitHub. It is a 2-layer board measuring 35 × 25 mm, with 20 components from 14 distinct parts.
Other key parts include the AMS1117-3.3, ICM-42688-P and TXB0104PW. By type, the board carries 9 capacitors, 4 diodes, 3 ICs, 2 connectors and 2 resistors.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
🍥 Accelerometer & Gyroscope ICM-42688 SPI/I2C breakout board for Arduino / Raspberry Pi.
Main components on the Icm-42688-breakout
Icm-42688-breakout bill of materials (BOM)
20 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ICM-42688-P | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U2 |
| 1 | TXB0104PW | TSSOP-14_4.4x5mm_P0.65mm | U3 |
| 1 | CONN_01X09 Conn_01x09 | PinHeader_1x09_P2.54mm_Vertical | J1 |
| 1 | POWER SELECT | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 3 | 1N4148W | D_SOD-123 | D1, D2, D4 |
| 1 | RED | LED_0603_1608Metric | D3 |
| 1 | 10UF 10uF | CP_EIA-3528-12_Kemet-T | C1 |
| 5 | 0.1UF 0.1uF | C_0603_1608Metric | C2, C5, C6, C8, C9 |
| 1 | 2.2UF 2.2uF | CP_EIA-3528-12_Kemet-T | C3 |
| 1 | 22UF 22uF | CP_EIA-3528-12_Kemet-T | C4 |
| 1 | 0.01UF 0.01uF | C_0603_1608Metric | C7 |
| 1 | 1k | R_0603_1608Metric | R1 |
| 1 | 10K 10k | R_0603_1608Metric | R2 |
Icm-42688-breakout design files
The KiCad project lives in the anyshake/icm-42688-breakout repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/ICM-42688.kicad_pcb
- Schematichardware/ICM-42688.kicad_sch
- BOMhardware/BOM.csv
Icm-42688-breakout: common questions
How big is the Icm-42688-breakout?
The Icm-42688-breakout measures 35 × 25 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Icm-42688-breakout?
20 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Icm-42688-breakout design files?
From the anyshake/icm-42688-breakout repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Icm-42688-breakout design in my own project?
The repository has no license, so all rights stay with anyshake. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
Eecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k