HardLabs

Scl3300-d01-evb

anyshake·scl3300-d01-evb·haradware/scl3300-evb.kicad_pcb

Scl3300-d01-evb PCB layout, top view — open source STM32 board by anyshake

About the Scl3300-d01-evb PCB

Scl3300-d01-evb is an open source STM32 PCB design by anyshake, published on GitHub. It is a 2-layer board measuring 65 × 40 mm, with 58 components from 33 distinct parts.

Its main chip is the STM32F103C8TX, from the STM32 family. Other key parts include the NEO-M8M, AMS1117-3.3, AT24CS08-SSHM, SCL3300-D01 and CH340N. By type, the board carries 20 capacitors, 13 resistors, 7 ICs, 7 diodes, 5 connectors and 3 switches.

It belongs with the rf & radio and sensors designs in this gallery.

From the project

🍥 SCL3300-D01 accelerometer EVB with GNSS and EEPROM for testing purpose.

Main components on the Scl3300-d01-evb

NEO-M8MAMS1117-3.3AT24CS08-SSHMSCL3300-D01CH340NSTM32F103C8TXSSD1306

Scl3300-d01-evb bill of materials (BOM)

58 components, 33 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NEO-M8M
U1
1
AMS1117-3.3
U2
1
AT24CS08-SSHM
U3
1
SCL3300-D01
U4
1
CH340N
U5
1
STM32F103C8TX
STM32F103C8Tx
U6
1
SSD1306
U7
1
SG-8002CA 8M-PCML0
Y1
1
SMA
J1
1
STLINK
J2
1
BOOT1
J3
1
BOOT0
J4
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
P1
1
DMS3R3
BT1
1
RESET
SW1
1
SAMPLERATE
SW2
1
OPTIONS
SW3
2
SS34
D1, D2
1
SMAJ5.0A
D3
1
GREEN
D4
Show 13 more
QtyPartRefs
3
Yellow
D5, D6, D7
1
1UH
1uH
L1
15
0.1UF
0.1uF
C1, C3, C5, C8, C9, C10, C11, C12 +7
1
10UF
10uF
C2
2
100PF
100pF
C4, C6
1
22UF
22uF
C7
1
0.01UF
0.01uF
C15
2
5.1K
5.1k
R1, R2
1
0
R3
4
1k
R4, R7, R8, R9
2
4.7K
4.7k
R5, R6
1
10
R10
3
10K
10k
R11, R12, R13

Scl3300-d01-evb design files

The KiCad project lives in the anyshake/scl3300-d01-evb repository on GitHub; these links point at the commit this page was built from.

Scl3300-d01-evb: common questions

What microcontroller does the Scl3300-d01-evb use?

The Scl3300-d01-evb is built around the STM32F103C8TX, from the STM32 family.

How big is the Scl3300-d01-evb PCB?

The Scl3300-d01-evb measures 65 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Scl3300-d01-evb?

58 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Scl3300-d01-evb design files?

From the anyshake/scl3300-d01-evb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Scl3300-d01-evb design in my own project?

The repository has no license, so all rights stay with anyshake. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Scl3300-d01-evb without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards