FMDP-1-B
apachecn·fm01·doc/kicad/fmdp-1-b/FMDP-1-B/FMDP-1-B.kicad_pcb
About the FMDP-1-B PCB
FMDP-1-B is an open source PCB design by apachecn, published on GitHub. It is a 2-layer board measuring 17 × 50 mm, with 62 components from 13 distinct parts.
Other key parts include the UCC27211. By type, the board carries 18 resistors, 4 transistors, 4 connectors, 4 capacitors, 2 ICs and 2 jumpers.
From the project
胖蚊子 1 号 (fat mosquito) 3 寸 4 旋翼小飞机.
将 220V 交流电转换为 12V 输出, 为作为整个系统的主电源, 功率约 200W, 成本约 CNY 10.
1.7MHz 工作频率, 20mm 直径, 功率约 2W, 电压约 24V (估计), 成本约 CNY 1.7.
控制器 stm32f103c8t6 开发小板 (蓝色药丸, blue pill), 成本约 CNY 8.8. 热敏电阻温度检测电路, LED 指示灯, 急停按钮, 等.
FMDP-1 完整电路分为板上电路和板外电路, FMDP-1-B 只包括板上电路部分.
Main components on the FMDP-1-B
FMDP-1-B bill of materials (BOM)
62 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | UCC27211 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U1, U2 |
| 4 | AOD482 | TO-252-2 | Q1, Q2, Q3, Q4 |
| 4 | Conn_01x01 | JS-2x2mm | J1, J2, J3, J4 |
| 24 | Conn_01x01 | JS-1x2mm | JC1, JC2, JC3, JC4, JL1, JL2, JS11, JS12 +16 |
| 2 | Conn_01x01 | JS-2x2mm | JG1, JG2 |
| 2 | Conn_01x01 | JS-2x2mm | JP1, JP2 |
| 2 | LED | LED_0402_1005Metric | D1, D2 |
| 2 | 0.1u 100V | C_0805_2012Metric | C1, C3 |
| 2 | 10u 25V | C_0805_2012Metric | C2, C4 |
| 2 | 100? | R_0402_1005Metric | R1, R2 |
| 8 | 3.3k | R_0402_1005Metric | R11, R14, R16, R18, R21, R24, R26, R28 |
| 2 | 100k | R_0402_1005Metric | R12, R22 |
| 6 | 4.7k | R_0402_1005Metric | R13, R15, R17, R23, R25, R27 |
FMDP-1-B design files
The KiCad project lives in the apachecn/fm01 repository on GitHub; these links point at the commit this page was built from.
FMDP-1-B: common questions
How big is the FMDP-1-B PCB?
The FMDP-1-B measures 17 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FMDP-1-B?
62 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the FMDP-1-B design files?
From the apachecn/fm01 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the FMDP-1-B design in my own project?
The repository has no license, so all rights stay with apachecn. Use it as a reference, and ask the author before reusing the design.
More boards in fm01
FMSMD-2
apachecn
20 × 50 mm96 parts2LNo license0FMESC-1-A
apachecn
48 × 54 mm89 parts2LNo license0FMESC-1-C
apachecn
14 × 21 mm40 parts2LNo license0ESP32
FM01-ES2-1
apachecn
20 × 32 mm27 parts2LNo license0LQFP64-10x10mm-CLAMP
apachecn
60 × 60 mm12 parts2LNo license0FMPCBVDL-1
apachecn
16 × 4 mm3 parts2LNo license0