FMESC-1-C

apachecn·fm01·doc/kicad/fmesc-1-c/FMESC-1-C/FMESC-1-C.kicad_pcb

FMESC-1-C PCB layout, top view — open source board by apachecn

About the FMESC-1-C PCB

FMESC-1-C is an open source PCB design by apachecn, published on GitHub. It is a 2-layer board measuring 14 × 21 mm, with 40 components from 10 distinct parts.

Other key parts include the FD6288Q. By type, the board carries 15 resistors, 6 connectors, 4 capacitors, 3 diodes, 1 IC and 1 jumper.

From the project

胖蚊子 1 号 (fat mosquito) 3 寸 4 旋翼小飞机.

胖蚊子电调 (FMESC-1) MOS 驱动小板. 与 FMESC-1-A, FMC-1 配合使用.

由于此电路板布线复杂, 难以在 2 层板的这个面积上完成布线. 如果采用 4 层板, 成本要贵几十倍, 所以为了避免使用 4 层板, 此处采用了 2 层板 + 7 根飞线的设计. 设计并不完美, 但足够便宜.

Main components on the FMESC-1-C

FMESC-1-C bill of materials (BOM)

40 components, 10 distinct parts.

QtyPartRefs
1
FD6288Q
U1
6
Conn_01x02
J1, J2, J3, J4, J5, J6
9
Conn_01x01
JA2, JB2, JC2, JV1, JV2, JV3, JV4, JV5 +1
1
Conn_01x12
JM1
1
Conn_01x02
JP1
3
D
D1, D2, D3
4
10u
C0, C1, C2, C3
6
10
R1, R2, R3, R4, R5, R6
6
2k
R11, R13, R15, R21, R22, R23
3
20k
R12, R14, R16

FMESC-1-C design files

The KiCad project lives in the apachecn/fm01 repository on GitHub; these links point at the commit this page was built from.

FMESC-1-C: common questions

How big is the FMESC-1-C PCB?

The FMESC-1-C measures 14 × 21 mm, has 2 copper layers and is 1 mm thick.

How many components are on the FMESC-1-C?

40 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the FMESC-1-C design files?

From the apachecn/fm01 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the FMESC-1-C design in my own project?

The repository has no license, so all rights stay with apachecn. Use it as a reference, and ask the author before reusing the design.

More boards in fm01