FM01-ES2-1
apachecn·fm01·doc/kicad/fm01-es2-1/FM01-ES2-1/FM01-ES2-1.kicad_pcb
About the FM01-ES2-1 PCB
FM01-ES2-1 is an open source ESP32 PCB design by apachecn, published on GitHub. It is a 2-layer board measuring 20 × 32 mm, with 27 components from 13 distinct parts.
Its main chip is the ESP32-S2-WROVER-I, from the ESP32 family. By type, the board carries 14 resistors, 6 capacitors, 4 connectors, 2 diodes and 1 IC.
From the project
胖蚊子 1 号 (fat mosquito) 3 寸 4 旋翼小飞机.
胖蚊子 1 号 (FM01) 用来承载 esp32-s2 wrover-i 模块的 PCB 小板.
上位机接口, 用于连接 esp32-s2 (作为 USB device) 和上位机 (USB host).
Main components on the FM01-ES2-1
FM01-ES2-1 bill of materials (BOM)
27 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S2-WROVER-I | ESP32-S2-WROVER | U1 |
| 1 | USB_B_Micro | USB_Micro-B_Molex_47346-0001 | J1 |
| 2 | Conn_01x10 | Hirose_DF13C_CL535-0410-4-51_1x10-1MP_P1.25mm_Vertical | J2, J3 |
| 1 | Conn_01x30 | Hirose_FH12-30S-0.5SH_1x30-1MP_P0.50mm_Horizontal | J4 |
| 1 | LED-G | LED_0402_1005Metric | D1 |
| 1 | LED-B | LED_0402_1005Metric | D2 |
| 1 | 22u | C_0402_1005Metric | C1 |
| 3 | 0.1u | C_0402_1005Metric | C2, C3, C4 |
| 2 | 20p | C_0402_1005Metric | C10, C11 |
| 2 | 15 | R_0402_1005Metric | R1, R2 |
| 3 | 10k | R_0402_1005Metric | R3, R18, R34 |
| 5 | 0 | R_0402_1005Metric | R4, R10, R11, R35, R36 |
| 4 | 1k | R_0402_1005Metric | R30, R31, R32, R33 |
FM01-ES2-1 design files
The KiCad project lives in the apachecn/fm01 repository on GitHub; these links point at the commit this page was built from.
FM01-ES2-1: common questions
What microcontroller does the FM01-ES2-1 use?
The FM01-ES2-1 is built around the ESP32-S2-WROVER-I, from the ESP32 family.
How big is the FM01-ES2-1 PCB?
The FM01-ES2-1 measures 20 × 32 mm, has 2 copper layers and is 1 mm thick.
How many components are on the FM01-ES2-1?
27 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the FM01-ES2-1 design files?
From the apachecn/fm01 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the FM01-ES2-1 design in my own project?
The repository has no license, so all rights stay with apachecn. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the FM01-ES2-1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in fm01
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k