LQFP64-10x10mm-CLAMP
apachecn·fm01·doc/kicad/lqfp64-10x10mm-clamp/LQFP64-10x10mm-CLAMP/LQFP64-10x10mm-CLAMP.kicad_pcb
About the LQFP64-10x10mm-CLAMP PCB
LQFP64-10x10mm-CLAMP is an open source PCB design by apachecn, published on GitHub. It is a 2-layer board measuring 60 × 60 mm, with 12 components from 5 distinct parts.
Other key parts include the LQFP64-G and LQFP48-G. By type, the board carries 10 connectors and 2 ICs.
It belongs with the usb & debug tools designs in this gallery.
From the project
胖蚊子 1 号 (fat mosquito) 3 寸 4 旋翼小飞机.
LQFP64, LQFP48 夹座, 脚距 0.5mm (比如 LQFP64 大小为 10x10mm, LQFP48 大小为 7x7mm), 适用于对应封装的单片机的烧录和测试, 无需焊接.
常见的单片机 (比如 stm32, hc32, gd32, apm32) 使用 LQFP64 (比如 stm32f030rct6) 或 LQFP48 (比如 stm32f103c8t6) 封装. 但是市面已有的烧录座子 (LQFP64) 太贵了, 因此自制一个廉价的解决方案.
LQFP64 的 1 至 64 脚即引出 LQFP64 封装的所有引脚, LQFP48 同理.
将单片机芯片安装到 LQFP64 板子的孔洞中, 注意 1 号引脚位置. (LQFP48 类似, 未测试)
将盖板放在安装芯片的板子下方, 使用 4 颗 M2 (直径 2mm) 螺丝拧紧固定.
Main components on the LQFP64-10x10mm-CLAMP
LQFP64-10x10mm-CLAMP bill of materials (BOM)
12 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LQFP64-G | LQFP-64_10x10mm_P0.5mm_H | U1 |
| 1 | LQFP48-G | LQFP-48_7x7mm_P0.5mm_H | U2 |
| 2 | Conn_01x01 | JS_2x2mm | J0, J10 |
| 4 | Conn_01x16 | JD_16P_2.0mm | J1, J2, J3, J4 |
| 4 | Conn_01x12 | JD_12P_2.0mm | J5, J6, J7, J8 |
LQFP64-10x10mm-CLAMP design files
The KiCad project lives in the apachecn/fm01 repository on GitHub; these links point at the commit this page was built from.
LQFP64-10x10mm-CLAMP: common questions
How big is the LQFP64-10x10mm-CLAMP PCB?
The LQFP64-10x10mm-CLAMP measures 60 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LQFP64-10x10mm-CLAMP?
12 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the LQFP64-10x10mm-CLAMP design files?
From the apachecn/fm01 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the LQFP64-10x10mm-CLAMP design in my own project?
The repository has no license, so all rights stay with apachecn. Use it as a reference, and ask the author before reusing the design.
More boards in fm01
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389