FMESC-1-A
apachecn·fm01·doc/kicad/fmesc-1-a/FMESC-1-A/FMESC-1-A.kicad_pcb
About the FMESC-1-A PCB
FMESC-1-A is an open source PCB design by apachecn, published on GitHub. It is a 2-layer board measuring 48 × 54 mm, with 89 components from 8 distinct parts.
By type, the board carries 24 transistors and 24 connectors.
From the project
胖蚊子 1 号 (fat mosquito) 3 寸 4 旋翼小飞机.
胖蚊子电调 (FMESC-1) 底层大版. 与 FMESC-1-C 以及 FMC-1 主控板配合使用.
作为四合一电调, 胖蚊子电调 (FMESC-1-A 电路板) 在此处充当了主分电板的角色. 因此在电源入口处, 反向并接一只大电流大功率二极管, 用于防止电源正负极反接. 同时并接一只 22V 压敏电阻, 用于过压保护, 防止接入超过最大设计电压的电源.
注意在此种保护机制下, 如果发生电源接错 (反接, 过压) 则本电路板相当于直接短路, 会造成电源承担很大的电流. 此处的保护机制目的是保护本电路板, 以及其余的上级电路板 (比如飞控), 而不是保护电源.
因此, 此处的保护机制单独无法提供足够的安全性, 接入本电路板的电池组, 必须自身具有一定的保护机制, 能够对短路大电流做出反应. 建议的电池组保护机制, 详见上述 电路保护 文档, 即采用过流保护 (自恢复保险丝) 以及电池电源指示灯 (故障状态指示).
FMESC-1-A bill of materials (BOM)
89 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 24 | AON6504 | DFN5x6_8L_EP1_P | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +16 |
| 24 | Conn_01x02 | FMPCBVDL-1-S | J1, J2, J3, J4, J5, J6, J7, J8 +16 |
| 1 | Conn_01x01 | JS-JB0 | JB0 |
| 12 | Conn_01x01 | JS-JBx | JB1, JB2, JB3, JB4, JB5, JB6, JB7, JB8 +4 |
| 1 | Conn_01x01 | JS-JG0 | JG0 |
| 12 | Conn_01x01 | JS-JGx | JG1, JG2, JG3, JG4, JG5, JG6, JG7, JG8 +4 |
| 3 | Conn_01x02 | FMPCBVDL-1-S | JT1, JT2, JT3 |
| 12 | Conn_01x01 | JS-Jx | MA1, MA2, MA3, MA4, MB1, MB2, MB3, MB4 +4 |
FMESC-1-A design files
The KiCad project lives in the apachecn/fm01 repository on GitHub; these links point at the commit this page was built from.
FMESC-1-A: common questions
How big is the FMESC-1-A PCB?
The FMESC-1-A measures 48 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FMESC-1-A?
89 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the FMESC-1-A design files?
From the apachecn/fm01 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the FMESC-1-A design in my own project?
The repository has no license, so all rights stay with apachecn. Use it as a reference, and ask the author before reusing the design.
More boards in fm01
FMSMD-2
apachecn
20 × 50 mm96 parts2LNo license0FMDP-1-B
apachecn
17 × 50 mm62 parts2LNo license0FMESC-1-C
apachecn
14 × 21 mm40 parts2LNo license0ESP32
FM01-ES2-1
apachecn
20 × 32 mm27 parts2LNo license0LQFP64-10x10mm-CLAMP
apachecn
60 × 60 mm12 parts2LNo license0FMPCBVDL-1
apachecn
16 × 4 mm3 parts2LNo license0