LoRa Module
About the LoRa Module
LoRa Module is an open source PCB design by Apex-Ottawa-Team, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 40 × 34.5 mm, with 8 components from 6 distinct parts.
By type, the board carries 2 modules, 2 capacitors, 2 resistors, 1 IC and 1 connector.
It belongs with the rf & radio and sensors designs in this gallery.
From the project
All the PCBs and CAD files for our Apex weather balloon module
This repository contains the hardware design files for Ottawa Skybound's weather ballon for Apex. The repository contains of multiple PCB modules designed in KiCad. The system includes a motherboard, wireless communication module, and various sensor interfaces.
LoRa Module: Wireless communication module using LoRa technology. Designed by Adam Turaj
Motherboard: Main control board for the Apex system. Designed by Adam Turaj
LoRa Module bill of materials (BOM)
8 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | EBYTE-E220-900T22D | U1 |
| 2 | Jumper_2_Bridged | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | M0, M1 |
| 1 | B5B-XH-A Conn_MB | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | CL05B104KP5NNNC 0.1uF | C_0402_1005Metric | C1 |
| 1 | GRM155R60J475ME47D 4.7uF | C_0402_1005Metric | C2 |
| 2 | RC0402JR-0710KL 10k | R_0402_1005Metric | R1, R2 |
LoRa Module design files
The KiCad project lives in the Apex-Ottawa-Team/hardware repository on GitHub; these links point at the commit this page was built from.
LoRa Module: common questions
How big is the LoRa Module?
The LoRa Module measures 40 × 34.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LoRa Module?
8 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the LoRa Module design files?
From the Apex-Ottawa-Team/hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LoRa Module design in my own project?
Yes, under the terms of its GPL-3.0 license, which Apex-Ottawa-Team chose for the repository.
More boards in hardware
Strain ADC
40.5 × 23.3 mm86 parts2LGPL-3.00
Ground RF Controller
36.1 × 37.8 mm27 parts4LGPL-3.00
STM32Apex Motherboard
49.8 × 39 mm21 parts2LGPL-3.00
Sensors
22.5 × 14 mm11 parts2LGPL-3.00
TVOC Gas Sensor
22.5 × 14 mm10 parts2LGPL-3.00
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956