Hdmi brd
About the Hdmi brd PCB
Hdmi brd is an open source PCB design by apistol78, published on GitHub. It is a 2-layer board measuring 42.7 × 83.8 mm, with 36 components from 13 distinct parts.
Other key parts include the SII9022ACNU and AZ1117EH-1.2TRG1. By type, the board carries 21 capacitors, 7 resistors, 4 inductors, 2 ICs and 2 connectors.
It belongs with the audio designs in this gallery.
From the project
Risc-V pipelined CPU and SoC written in SystemVerilog
After everything has been built you should be able to run the emulators:
Written using SystemVerilog and are split up into logical pieces where each stage of the pipeline is in a separate module:
Main components on the Hdmi brd
Hdmi brd bill of materials (BOM)
36 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SII9022ACNU | QFN-72-1EP_10x10mm_P0.5mm_EP6x6mm | U1 |
| 1 | AZ1117EH-1.2TRG1 | SOT-223-3_TabPin2 | U2 |
| 1 | Conn_02x32_Odd_Even | PinSocket_2x32_P2.54mm_Vertical | J1 |
| 1 | 685119134923 | 685119134923 | J2 |
| 1 | 0.022uH | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 3 | 0.022uH | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L2, L3, L4 |
| 11 | 0.1uF | C_0402_1005Metric | C1, C2, C7, C8, C9, C10, C11, C12 +3 |
| 4 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C16, C17, C18 |
| 4 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C19, C20, C21 |
| 1 | 10uF | CP_Elec_5x5.3 | C5 |
| 1 | 100uF | CP_Elec_5x5.3 | C6 |
| 6 | 4.7k | R_0402_1005Metric | R1, R3, R4, R5, R6, R7 |
| 1 | 10k | R_0402_1005Metric | R2 |
Hdmi brd design files
The KiCad project lives in the apistol78/rv32 repository on GitHub; these links point at the commit this page was built from.
Hdmi brd: common questions
How big is the Hdmi brd PCB?
The Hdmi brd measures 42.7 × 83.8 mm, has 2 copper layers and is 1.69 mm thick.
How many components are on the Hdmi brd?
36 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hdmi brd design files?
From the apistol78/rv32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hdmi brd design in my own project?
The repository has no license, so all rights stay with apistol78. Use it as a reference, and ask the author before reusing the design.
More boards in rv32
RP2040/RP2350Motherboard
183.4 × 143.1 mm117 parts4LNo license1
RP2040/RP2350Usb host hub
129 × 41.9 mm52 parts2LNo license1
Qm k7 aux brd
47 × 83.8 mm24 parts2LNo license1
Srambrd
45.7 × 83.8 mm22 parts4LNo license1
Iobrd
38.1 × 83.8 mm20 parts2LNo license1
Hdmi tx
35.2 × 31.5 mm20 parts2LNo license1
Lcdbrd
30.5 × 83.8 mm6 parts2LNo license1
Lcd
68.6 × 99.1 mm3 parts2LNo license1
STM32Stm32f breakout
27.4 × 63.3 mm3 parts2LNo license1
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687