HardLabs

PCB-temp

ApolLO-CanSat·PCB-temp

PCB-temp layout, top view — open source RP2040/RP2350 board by ApolLO-CanSat

About the PCB-temp

PCB-temp is an open source RP2040/RP2350 PCB design by ApolLO-CanSat, published on GitHub. It is a 2-layer board measuring 69.5 × 54 mm, with 15 components from 13 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the BMP280_Module and RFM98W-433S2. By type, the board carries 4 connectors, 3 modules, 3 capacitors, 2 resistors, 1 buzzer and 1 diode.

From the project

Repo for temporary PCB

Main components on the PCB-temp

RaspberryPi_PicoBMP280_ModuleRFM98W-433S2

PCB-temp bill of materials (BOM)

15 components, 13 distinct parts.

QtyPartRefs
1
RaspberryPi_Pico
A1
1
BMP280_Module
A2
1
RFM98W-433S2
MOD1
2
Conn_01x04_Pin
J1, J2
1
Conn_01x06_Socket
J3
1
Conn_Coaxial_Small
J5
1
Buzzer
BZ1
1
~
MPU1
1
LED
D1
2
100u
C1, C3
1
100n
C4
1
220
R1
1
100
R3

PCB-temp design files

The KiCad project lives in the ApolLO-CanSat/PCB-temp repository on GitHub; these links point at the commit this page was built from.

PCB-temp: common questions

What microcontroller does the PCB-temp use?

The PCB-temp is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the PCB-temp?

The PCB-temp measures 69.5 × 54 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB-temp?

15 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCB-temp design files?

From the ApolLO-CanSat/PCB-temp repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PCB-temp design in my own project?

The repository has no license, so all rights stay with ApolLO-CanSat. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCB-temp without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards