Oximeter max30102 LPC845
About the Oximeter max30102 LPC845 PCB
Oximeter max30102 LPC845 is an open source ESP8266 PCB design by ApophisXIV, published on GitHub. It is a 2-layer board measuring 100 × 30 mm, with 14 components from 11 distinct parts.
Its main chip is the ESP-01v090, from the ESP8266 family. Other key parts include the MAX30102-BRK, Mini360 and AMS1117-3.3. By type, the board carries 4 ICs, 3 connectors, 3 capacitors, 2 test points and 1 diode.
From the project
Some hardware stuff
Main components on the Oximeter max30102 LPC845
Oximeter max30102 LPC845 bill of materials (BOM)
14 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX30102-BRK | MAX30102-BRK | U1 |
| 1 | ESP-01v090 | ESP-01 | U2 |
| 1 | Mini360 | Mini360_step-down | U3 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | VIN | TerminalBlock_bornier-2_P5.08mm | J1 |
| 2 | Conn_01x20_Socket | PinSocket_1x20_P2.54mm_Vertical | J7, J9 |
| 1 | LPC845-BRK | NXP_Semiconductors-LPC845-BRK-MFG | MD1 |
| 2 | TestPoint | PinHeader_1x01_P2.54mm_Vertical | TP1, TP2 |
| 1 | D | D_DO-35_SOD27_P2.54mm_Vertical_KathodeUp | D1 |
| 2 | C | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 1 | C | C_Radial_D5.0mm_H7.0mm_P2.00mm | C3 |
Oximeter max30102 LPC845 design files
The KiCad project lives in the ApophisXIV/PCB-Desing repository on GitHub; these links point at the commit this page was built from.
Oximeter max30102 LPC845: common questions
What microcontroller does the Oximeter max30102 LPC845 use?
The Oximeter max30102 LPC845 is built around the ESP-01v090, from the ESP8266 family.
How big is the Oximeter max30102 LPC845 PCB?
The Oximeter max30102 LPC845 measures 100 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Oximeter max30102 LPC845?
14 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Oximeter max30102 LPC845 design files?
From the ApophisXIV/PCB-Desing repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Oximeter max30102 LPC845 design in my own project?
The repository has no license, so all rights stay with ApophisXIV. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Oximeter max30102 LPC845 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in PCB-Desing
Preperf 10x10 V1
100 × 100 mm1359 parts8LNo license2
AVR/ArduinoPseudo walkie talkie
70.8 × 35.5 mm51 parts2LNo license2
Keypad w leds
50 × 50 mm47 parts2LNo license2
Simple heart
46.3 × 43.2 mm33 parts2LNo license2
PICVolt amp meter
50 × 40 mm24 parts2LNo license2
Mic preamplifier
44.8 × 38.5 mm16 parts2LNo license2
Lm317 psu w protection v1
50 × 32.9 mm12 parts2LNo license2
555 astable
23.1 × 23.6 mm11 parts2LNo license2
555 astable THT
39.9 × 32.6 mm8 parts2LNo license2
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398